메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정성민 (부경대학교) 박인덕 (한국기계연구원) 남기우 (부경대학교) 최병철 (부경대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 한국동력기계공학회지 제23권 제2호
발행연도
2019.4
수록면
27 - 36 (10page)
DOI
10.9726/kspse.2019.23.2.027

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Austenitic stainless steel is used in the nuclear industry as structural materials and coatings because it has excellent workability, weldability and high temperature characteristics. Nuclear power plant structures are mainly large structures manufactured using welding which is mainly arc welding. Arc welding is a welding method with relatively high heat input. Austenitic stainless, however, steel requires low heat input because it has high thermal expansion coefficient and lower thermal conductivity than that of carbon steels. Over heat input may cause various welding defects such as severe deformation and coarsening of the grain in the joint, which may result in deterioration of the mechanical properties. Recently, laser welding has been proposed to solve the problem of heat input. In this study, the thickness of 6 mm STS304L of austenitic phase was butt welded using laser and TIG, and mechanical properties were compared and analyzed. Joints of laser welding show better tensile and impact properties than that of TIG. However, the bending properties were worse than that of TIG.

목차

Abstract
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-550-000716432