메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강선영 (Seoul National University of Science and Technology) 박민영 (Korea Electronics-Machinery Convergence Technology Institute) 장동영 (Seoul National University of Science and Technology)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.28 No.3
발행연도
2019.6
수록면
188 - 192 (5page)
DOI
10.7735/ksmte.2019.28.3.188

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this study, silver paste was made with and without M13(sol) particles, and then electrodes were printed using screen printing. The conductivity changes and electro-mechanical properties of the printed electrodes were studied using the stretching test, bending test, and bending figure test. For silver pastes with M13(sol) particles, the resistance was measured up to 140% with increased strain. In contrast, the bending test and bending figure test showed no change in resistance regardless of the presence of M13(sol) particles. The scanning electron microscope was used to observe the particle difference, and indicated that holes generated by the sintered flakes were connected by non-sintered M13(sol) particles at 130 ℃ for improved flexibility.

목차

ABSTRACT
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-003-000711624