메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국인체미용예술학회 한국인체미용예술학회지 한국인체미용예술학회지 제17권 제1호
발행연도
2016.1
수록면
7 - 20 (14page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In this study, a mannequin’s dimensions were measured and a diagram’s projection applicable in practice was created in order to determine if the graduation design formed by the lines that represent the shape of the diagram at 45 degrees and its gravity direction matched the actual design. In addition, the length of the nape point (N.P) was set to 50mm, and a layered formation pattern was taken advantage of by using the head crest. This was then compared with 45-degree graduation forms, and the diagram was improved and reconfigured. The study results found the following: First, in the nape section, 40 degrees should be maintained, and a 20mm layer is formed. Second, in the middle section, 55 degrees, which creates a slight heavy feeling and smooth layer (10mm), should be applied. Third, in the radial section, which is greater than other sections in terms of curvature, 80 degrees should be applied to form an approximately 9mm layer. Consequently, the projection increases 13 degrees on average in comparison with a 45-degree diagram, and about 39mm layer will arise. Upon the graduation haircut, it is difficult to create a constant flow of layers and shapes with the diagram under a single angle, making satisfying results unlikely. Therefore, the projection by section should be individually set to have the haircut wanted by the diagram. In terms of the shape of a graduation formed by a different projection, in conclusion, an oval style similar to the shape in the back of the head was observed.

목차

등록된 정보가 없습니다.

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0