메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국분말야금학회 한국분말야금학회지 한국분말야금학회지 제21권 제6호
발행연도
2014.1
수록면
460 - 466 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Al-Si-SiC composite powders with intra-granular SiC particles were prepared by a gas atomization process. The composite powders were mixed with Al-Zn-Mg alloy powders as a function of weight percent. Those mixture powderswere compacted with the pressure of 700 MPa and then sintered at the temperature of 565-585oC. T6 heat treatmentwas conducted to increase their mechanical properties by solid-solution precipitates. Each relative densityaccording to the optimized sintering temperature of those powders were determined as 96% at 580oC for Al-Zn-Mgpowders (composition A), 97.9% at 575oC for Al-Zn-Mg powders with 5 wt.% of Al-Si-SiC powders (composition B),and 98.2% at 570oC for Al-Zn-Mg powders with 10 wt.% of Al-Si-SiC powders (composition C), respectively. Eachhardness, tensile strength, and wear resistance test of those sintered samples was conducted. As the content of Al-Si-SiCpowders increased, both hardness and tensile strength were decreased. However, wear resistance was increased by theincrease of Al-Si-SiC powders. From these results, it was confirmed that Al-Si-SiC/Al-Zn-Mg composite could behighly densified by the sintering process, and thus the composite could have high wear resistance and tensile strengthwhen the content of Al-Si-SiC composite powders were optimized.

목차

등록된 정보가 없습니다.

참고문헌 (14)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0