메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국입자에어로졸학회 PARTICLE AND AEROSOL RESEARCH PARTICLE AND AEROSOL RESEARCH 제8권 제4호
발행연도
2012.1
수록면
173 - 180 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
SiC particles, 8.3 ㎛ in volume average diameter, were chlorinated in an alumina tubular reactor, 2.4 cm in diameter and 32 cm in length, with reactor temperature varied from 100 to 1200℃. The flow rate of the gas admitted to the reactor was held constant at 300 cc/min, the mole fraction of chlorine in the gas at 0.1 and the reaction time at 4 h. The chlorination was negligibly small up to the temperature of 500℃. Thereafter, the degree of chlorination increased remarkably with increasing temperature until 900℃. As the temperature was increased further from 900 to 1200℃, the increments in chlorination degree were rather small. At 1200℃, the chlorination has nearly been completed. The surface area of the residual carbon varied with chlorination temperature in a manner similar to that with the variation of chlorination degree with temperature. The surface area at 1200℃ was 912 ㎡/g. A simple model was developed to predict the conversion of a SiC under various conditions. A Langmuir-Hinshelwood type rate law with two rate constants was employed in the model. Assuming that the two rate constants, k1 and k2, can be expressed as and , the four parameters, A1, E1, A2, and E2 were determined to be 32.0 m/min, 103,071 J/mol, 2.24 ㎥/mol and 39,526 J/mol, respectively, through regression to best fit experimental data.

목차

등록된 정보가 없습니다.

참고문헌 (15)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0