지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
The flow rate analysis for sanitary fixtures has been studied to determine the water supply piping system and size. The study has been carried out to analyze for a various water supply pressure and piping size theoretically. Also, the study has been carried out to analyze for a various water supply piping system experimentally. The water supply pressure is varied from 0.01MPa to 0.07MPa, and the piping size is varied from 6mm to 15mm. The water supply piping systems are one-to-one, all-loop-type, and bathroom-loop-type water supply piping system. The results indicate that the piping size is able to supply water fully in case of smaller than 15mm if the water supply pressure keep an necessary minimum pressure. And the gap of flow rate is very little for the various water supply piping systems
목차
등록된 정보가 없습니다.
참고문헌 (4)
참고문헌 신청
/ 2001 / Sanitary, Fire- Protection and Environment, Vol. 4 / SAREK Handbook
T. W. Lee / 2010 / An experimental study of on the water supply method combined with the variable diameter dual piping system / Proceedings of the SAREK 2010 Summer Annual Conferen
Y. H. Lee / 1999 / The evaluation of the simultaneous flow rate for sizing the water supply piping in the office building / Korean Journal of Air-Conditioning and Refrigerati
전홍균 / 2009 / 건식 스프링클러설비의 수리계산과 설계 적정성 해석 / 한국기계기술학회지 11 (3) : 83 ~ 88
T. W. Lee / 2010 / An experimental study of on the water supply method combined with the variable diameter dual piping system / Proceedings of the SAREK 2010 Summer Annual Conferen
Y. H. Lee / 1999 / The evaluation of the simultaneous flow rate for sizing the water supply piping in the office building / Korean Journal of Air-Conditioning and Refrigerati
전홍균 / 2009 / 건식 스프링클러설비의 수리계산과 설계 적정성 해석 / 한국기계기술학회지 11 (3) : 83 ~ 88
이 논문의 저자 정보
최근 본 자료
댓글(0)
0