지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This study investigated the polymerization inhibition effect of latex gloves on addition silicone
impression material. Three different kinds of addition silicone impression materials and a natural
latex gloves were used in this study. The results were as follows.
1. Compared to the control group, all of those three kinds of impression materials took longer curing
time in order of unwashed, alcohol and washed group, on the other hand, degloving group
had shorter curing time than control group(p<0.05).
2. By the type of impression materials, there was no significant difference observed between
Exafine and Twinz in ungloved group, Exafine and ImprintⅡ in unwashed group, and Exafine
and Twinz in degloving group(p>0.05).
3. The degree of polymerization at 6 minutes after mixing impression materials was evaluated by
dividing its range into score 1 to 5. All of the impression materials got score 5 in control group
and degloving group, which implies perfect polymerization. In unwashed group, most of them
appeared to be score 2 while score 3 were most frequently observed in alcohol group and score 4
in washed group. Thus each group showed differences in the degree of polymerization(p<0.05).
목차
등록된 정보가 없습니다.
참고문헌 (23)
참고문헌 신청
American Dental Association / 1996 / Infection control recommendation for the dental office and the dental laboratory / J Am Dent Assoc 127 (5) : 672 ~ 680
Anusavice KJ / 2003 / Phillips’science of dental materials. 11th ed / Saunders : 205 ~ 230
Baumann MA / 1995 / The influence of dental gloves on the setting of impression materials / Br Dent J 179 (4) : 130 ~ 135
Brwoning GC / 1994 / Removal of latex glove contaminants prior to taking poly (vinylsiloxane) impressions / Quintessence Int 25 (11) : 787 ~ 790
Causton BE / 1993 / Implications of the presence of dithiocarbamate in latex gloves / Dent Mater 9 (3) : 209 ~ 213
Anusavice KJ / 2003 / Phillips’science of dental materials. 11th ed / Saunders : 205 ~ 230
Baumann MA / 1995 / The influence of dental gloves on the setting of impression materials / Br Dent J 179 (4) : 130 ~ 135
Brwoning GC / 1994 / Removal of latex glove contaminants prior to taking poly (vinylsiloxane) impressions / Quintessence Int 25 (11) : 787 ~ 790
Causton BE / 1993 / Implications of the presence of dithiocarbamate in latex gloves / Dent Mater 9 (3) : 209 ~ 213
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
일부 시판 폴리비닐실록산 인상재의 정밀도에 영향을 미치는 요인분석
한국치위생학회지
2008 .01
-
Investigation of the effects of storage time on the dimensional accuracy of impression materials using cone beam computed tomography
The Journal of Advanced of Prosthodontics
2016 .01
-
DIMENSIONAL STABILITY OF IMPRESSION BODY USING THE SILICONE INDEX TOOTH TRAY IMPRESSION SYSTEM
Journal of Korean Dental Science
2008 .06
-
The Flowability of the Light Body Silicone Impression Material Used by a Double-mix Technique, and the Hydrophilicity of the Light Body Impression Material
대한치과재료학회 학술대회
2011 .05
-
A simple and effective method for addition silicone impression disinfection
The Journal of Advanced of Prosthodontics
2019 .01
-
AN STUDY ON THE DIMENSIONAL CHANGE OF PLASTER TO TIME WITH IMPRESSION MATERIALS
대한치과기공학회지
1988 .01
-
Accuracy of five implant impression technique: effect of splinting materials and methods
The Journal of Advanced of Prosthodontics
2011 .01
-
성공적인 총의치 제작을 위한 단계별 포인트 : 무치악인상채득, 이것이 핵심이다
대한치과의사협회지
2017 .01
-
Silicone Index Tooth Tray를 이용한 인상체의 체적안정성에 대한 연구
대한치과보철학회지
2005 .01
-
Alternative impression technique for multiple abutments in difficult case to control
The Journal of Advanced of Prosthodontics
2010 .01
-
계면활성제 첨가가 부가중합 실리콘 인상재의 젖은 와동 선각부 재현성 및 물성에 미치는 영향
대한치과재료학회지
2008 .03
-
치과용 탄성 인상재를 기반으로 채득된 디지털 모형의 정확성연구: 3차원 중첩 분석
치위생과학회지
2014 .01
-
Implant overdenture impressions using a dynamic impression concept
The Journal of Advanced of Prosthodontics
2014 .01
-
Accuracy of new implant impression technique using dual arch tray and bite impression coping
The Journal of Advanced of Prosthodontics
2018 .01
-
소독액이 인상재의 표면특성에 미치는 영향
대한치과재료학회지
2010 .12
-
시간 경과에 따른 부가중합형 실리콘 인상재의 수소 발생
대한치과재료학회지
1995 .06
-
Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions
대한치과교정학회지
2016 .05
-
항균 필러가 첨가된 치과용 부가중합형 실리콘 고무인상재
대한치과재료학회 학술대회
2008 .11
-
몇 齒科印像材料의 Flow에 對한 實驗的硏究
대한치과의사협회지
1963 .05
-
Comparison of the fit of cast gold crowns fabricated from the digital and the conventional impression techniques
The Journal of Advanced of Prosthodontics
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0