지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2007.1
- 수록면
- 90 - 95 (6page)
이용수
초록· 키워드
오류제보하기
Cathodic protection technology has been widely used on ship’s outer hull and inner side of ballast water tanks as a supplementary corrosion protection measure in combination with protective organic coatings. Impressed current cathodic protection system is typically opted for the ship’s hull and, sacrificial anode system, for ballast water tanks. The anticipation and interest in cathodic protection system for ships has been surprisingly low-eyed to date in comparison with protective coatings. Computational analysis for the verification of cathodic protection design has been tried sometimes for offshore marine structures, however, in commercial shipbuilding section, decades old design practice is still applied, and no systematic or analytical verification work has been done for that. In this respect, over-rotection from un-erified initial design protocol has been also concerned by several experts. Especially, it was frequently reported in sacrificial anode system that even after full design life time, anode was remaining nearly intact. Another issue for impressed current system, for example, is that the anode shield area design for ship’s outer hull should be compromised with actual application situation, because the state-of-the-art design equation is quite impractical from the applicator’s stand. Besides that, in this study, some other critical design issues for sacrificial anode and impressed current cathodic protection system were discussed.
목차
등록된 정보가 없습니다.
참고문헌 (5)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Numerical analysis results of the cathodic protection for the underground steel pipe by anode installation method
Journal of Advanced Marine Engineering and Technology (JAMET)
2014 .12
-
태양광시스템을 이용한 방식 기술
한국태양에너지학회 학술대회논문집
1994 .05
-
선박의 해양 부식과 부식방지 장치
한국표면공학회지
2011 .06
-
The effect of cathodic protection system by means of zinc sacrificial anode on pier in Korea
Journal of Advanced Marine Engineering and Technology (JAMET)
2014 .12
-
Advanced Cathodic Protection Modeling Associated with Coating Degradation Conditions
Corrosion Science and Technology
2009 .01
-
Lifetime of Insoluble Anode for Cathodic Protection on Concrete Construction
Corrosion Science and Technology
2005 .01
-
희생양극법을 이용한 레일부식 저감 방안에 관한 연구
한국안전학회지
2017 .01
-
Influences of coatings and solution corrosivity on cathodic protection of metallic materials
Corrosion Science and Technology
2006 .01
-
A Study of Optimizing Cathodic Protection in Comparison of Design Methodologies
조명·전기설비학회논문지
2010 .11
-
해상구조물의 방식설계 최적화를 위한 설계요건 분석 및 시간의존적 방식성능 해석
한국표면공학회지
2016 .10
-
Remote Monitoring and Controlling System for Cathodic Protection on Concrete Structure
Corrosion Science and Technology
2002 .01
-
알루미늄 선박의 희생양극 음극방식을 위한 소요전류 결정에 관한 실험 연구
한국표면공학회 학술발표회 초록집
2019 .11
-
Electrochemical and on-site tests for the application of cathodic protection on the inner surface of seawater pipes
Journal of Advanced Marine Engineering and Technology (JAMET)
2019 .10
-
A New Protection Strategy of Impressed Current Cathodic Protection for Ship
Journal of Mechanical Science and Technology
2004 .04
-
Effect on the ICCP system from types and arrangement of anodes in reinforced concrete specimens
Journal of Advanced Marine Engineering and Technology (JAMET)
2019 .06
-
수치해석에 의한 LNG 저장탱크용 강관파일 전기방식 설계 최적화 연구
Corrosion Science and Technology
2017 .01
-
방식시스템 제어용 보드 개발에 관한 연구
한국동력기계공학회 학술대회 논문집
2005 .06
-
Study on the Influence of Stray current Between Sacrificial Anode Cathodic Protection and Impressed Current Cathodic Protection in Marine Environment
Corrosion Science and Technology
2012 .01
-
아연 메쉬 희생양극을 이용한 콘크리트 파일의 음극방식 특성 및 방식전류 유효거리
한국콘크리트학회 학술대회 논문집
2008 .11
-
선박용 차세대 외부전원방식 제어 및 감시 시스템 UNIT 개발
동력시스템공학회지
2006 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0