메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Chongdo Park (POSTECH) Taekyun Ha (POSTECH) Boklae Cho (Korea Research Institute of Standards and Science)
저널정보
한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.24 No.4
발행연도
2015.7
수록면
84 - 89 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The base pressure and outgassing rate of a mild steel chamber were measured and compared to those of a stainless steel chamber. A combined sputter-ion and non-evaporable getter pump with a nominal pumping speed of 490 l/s generated the base pressure of 2.7×10<SUP>?11</SUP> mbar in the mild steel chamber and 1.2×10<SUP>?10</SUP> mbar in the stainless steel chamber. The rate-of-rise measurements show that the mild steel has an extremely low outgassing rate of 2.6×10<SUP>?13</SUP> mbar l s<SUP>?1</SUP> cm<SUP>?2</SUP>, which is about one-order of magnitude smaller than the outgassing rate of the stainless steels. Vacuum annealing of the mild steel at 850oC reduced the outgassing rate further to 8.8×10<SUP>?14</SUP> mbar l s<SUP>?1</SUP> cm<SUP>?2</SUP>, which was comparable to the outgassing rate of a heat treated stainless steel for extreme-high vacuum use.

목차

I. Introduction
II. Experimental
III. Results and Discussion
IV. Summary
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-420-001275562