메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제20권 제1호
발행연도
2019.1
수록면
84 - 89 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Ni-P-Al2O3 composite coatings were prepared from electroless plating method on copper substrate with different contents ofAl2O3 powder. Thus obtained composite coatings were heat treated at 400 oC for 1 h in an inert environment and subjectedto scratch tests. Compared to Ni-P coating, codeposition of Al2O3 exhibited the nodular structure and slightly increased surfaceroughness of the composite coatings. Low P nickel coating with approximately 4 wt% of codeposited Al2O3 into the depositwas obtained with 10 g/L Al2O3 concentration into the plating bath. Enhanced Vickers microhardness of the composite coatingwas due to the synergistic effects of the precipitation hardening by Ni3P phase and co-deposited hard Al2O3 particles. Furthermore, Ni-P-Al2O3 composite coatings have shown considerable improvement in load-bearing capacity of the coatingmatrix, thereby, enhancing the scratch resistant properties of the composite coating.

목차

등록된 정보가 없습니다.

참고문헌 (22)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0