메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제20권 제1호
발행연도
2019.1
수록면
54 - 58 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In this study, aluminium titanate (AT, Al2TiO5) and mullite (M, 3Al2O3·2SiO2) ceramics were synthesized by reaction sinteringfrom Al2O3, SiO2 and TiO2 powders which consisted of homogenization by wet ball milling followed by sintering AT and Min air at 1550 oC for 2 hrs and 1400 oC for 2 hrs, respectively. AT and M in different amounts (0 and 20 wt. %) were mixedwith Porcelain (P). AT and M reinforced porcelain ceramics were prepared by the powder metallurgy route. After drying, thepowders were compressed to preforms of 56x12x10 mm by uniaxial pressing at 200 MPa. The green compacts were sinteredat 1100-1200 oC for 1-5 hr under air. Investigations were carried out, on the effect of addition of AT and M in terms of physicalproperties, microstructure, XRD phases, as well as wear and mechanical properties of AT and M-reinforced porcelain ceramiccomposites. Phase and microstructural characterizations of the sintered materials were carried out by using X-ray diffractiontechnique (XRD) and scanning electron microscope (SEM). The Micro Vickers hardness testing was performed using theShimadzu HMV-MIII hardness tester.

목차

등록된 정보가 없습니다.

참고문헌 (19)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0