메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
임승현 (Kyungpook National University) 전법규 (Korea Construction and Transport Engineering Development Collaboratoty Management Institute) 장성진 (Korea Construction and Transport Engineering Development Collaboratoty Management Institute) 최인길 (Korea Atomic Energy Research Institute)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제29권 제6호(통권 251호)
발행연도
2019.12
수록면
735 - 744 (10page)
DOI
10.5050/KSNVE.2019.29.6.735

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Safety-related electrical cabinets that are installed in nuclear power plants require seismic performance evaluation. The seismic performance evaluation for these cabinets is conducted by shaking table tests or numerical analyses. These methods usually assume that the electrical cabinets are rigidly anchored to the floor or foundation when performing the seismic evaluation by the numerical simulation. However, this assumption may not be valid depending on how the cabinets are anchored as rocking or uplifting could occur in a lower section of the cabinets that are anchored by anchored bolts. Researchers conducted a study to calculate these effects numerically. In their research, rocking, uplifting and shifting modes of the cabinets were determined by the shaking table test. In this study, the shaking table test was conducted to analyze the dynamic characteristics of the rocking mode of the cabinet.

목차

ABSTRACT
1. 서론
2. 입력지진동
3. 진동대 시험
4. 공진탐색 시험 결과
5. 캐비닛 로킹의 응답영향 분석
6. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-424-000125702