메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
권민선 (강원대학교) 김예린 (강원대학교) 김민성 (강원대학교) 홍정화 (강원대학교) 이명화 (강원대학교) 이우근 (강원대학교)
저널정보
한국대기환경학회 한국대기환경학회지(국문) 한국대기환경학회지 제36권 제1호
발행연도
2020.2
수록면
119 - 127 (9page)
DOI
10.5572/KOSAE.2020.36.1.119

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Electrostatic pleated filters are generally used in an air purifier. However, the pleating method has not been based on a theoretical approach but been dependent upon the manufacturer’s know-how. In this study, an optimal pleating geometry was evaluated based on the filter quality factor considering collection efficiency and pressure drop of a filter. One flat filter and eight pleated filters (4, 6, 8, 10, 15, 21, 25, 30 pleats) with 29 mm in pleat height and 105 mm in filter width, were prepared, and their pressure drops and collection efficiencies were measured. Pressure drops of pleated filters with pleat number higher than 21 at the same gas flowrate increased with the number of pleats, which resulted from the increased filtration velocity due to decreased effective filtration area. However, collection efficiencies of a pleated filter for test particles (30, 50, 100, 200 nm) increased with increasing the number of pleats. Moreover, the highest filter quality factor for the pleated filter with 29 mm in pleat height was found at the pleats number of 21 (pleating ratio (=pleat height/pleat width), α=5.8), which resulted in the optimal pleat geometry.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (26)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-539-000411578