메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이용범 (Ajou University) 이기근 (아주대학교)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제69권 제4호
발행연도
2020.4
수록면
586 - 593 (8page)
DOI
10.5370/KIEE.2020.69.4.586

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
A resistive humidity sensor was developed based on 3 dimensional (3D) ZnO nanorods (NDs):MoS2 sensing film and wheatstone bridge circuitry for real time monitoring of transformer insulation oil. Wheatstone bridge circuitry was employed to minimize interference due to ambient temperature changes, and 3D sensing film to enhance the sensitivity and the minimum detection resolution. A thick SiO2 passivation layer was covered all 3D structures except for the sensing film to eliminate any contacts with transformer insulating oil during measurement for the purpose of long term stability. The process for the 3D ZnO:MoS2 structures was optimized by varying the solution composition ratio, temperature, and growth time. The completed sensors were characterized in both air and oil and then its properties were compared. The evaluated sensitivity of the sensor in the air was about 15 mV/%RH, and little changes are observed with respect to ambient temperature variations. The sensitivity of the sensor in oil was evaluated to be about 6.8 mV/%RH, slightily lower than the one in air. Long term stability in the sensor performances and high sensing resolution were observed from the developed sensor.

목차

Abstract
1. 서론
2. 동작원리 및 시스템 구성도
3. 솔루션 방법을 이용한 ZnO 나노로드 (nanorod) 성장 공정 최적화
4. 제작
5. 테스팅 셋업
6. 측정 결과
7. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-560-000523814