메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김지언 (한국폴리텍대학 청주캠퍼스) 김지성 (경북대학교) 이호 (경북대학교) 박민규 (영남이공대학교) 김성욱 (포항산업과학연구원) 신성선 (경북대학교) 황준호 (경북대학교) 김현덕 (경북대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第38卷 第2號
발행연도
2020.4
수록면
197 - 202 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study conducted a comparative analysis of laser power feedback control by measuring the melting pool size and temperature in the Directed Energy Deposition (DED) of SUS316L, to identify the effect of a conventional melting pool monitoring system on 3D metal printing performance. In the study, a CLAMIR was used on a developing 3D metal printer to control the laser beam power by measuring the size and temperature of the melting pool using an IR camera. Test parts were built from same CAD model but under different conditions, specifically, with CLAMIR on and off. The parts were investigated three ways: by 3D scanning to measure geometric errors, CT scanning to look into pore creation and distribution, and tensile tests to analyze mechanical performance.

목차

Abstract
1. 서론
2. DED Metal 3D printing
3. 실험방법
4. 실험 결과고찰
5. 결론
References

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-581-000580783