메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Kyung Jin Min (Konkuk University) Joo Hyeong Kim (Konkuk University) Eun Joo Oh (Konkuk University) Jun Hee Ryu (Konkuk University) Ki Young Park (Konkuk University)
저널정보
대한환경공학회 Environmental Engineering Research Environmental Engineering Research 제26권 제2호
발행연도
2021.4
수록면
64 - 70 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Electrodialysis has been used for treating toxic substances such as heavy metals and minimizing secondary environmental pollution problems effectively. However, electrodialysis depends on the operating parameters as well as fluid dynamics and electrical properties. This study provides design elements for the treatment of heavy metal-containing wastewater by electrodialysis. We found that the limiting current density (LCD) is proportional but not completely linear to the diluate concentration over a threshold value. In contrast, it is linear to the linear flow velocity for the whole range. As the number of cell pairs increases, because linear flow velocity and LCD increase, the removal efficiency of heavy metals also increases. Therefore, for highly concentrated wastewater, increasing the linear flow velocity, the applied voltage, and the number of cell pairs can effectively improve removal efficiency. It was found that the current efficiency is as low as 17% when the removal efficiency of heavy metals exceeds 95%. Thus, it is necessary to select an operating range that optimizes the operating and initial investment costs for the effective removal of heavy metals using electrodialysis.

목차

ABSTRACT
1. Introduction
2. Material and Methods
3. Results and Discussion
4. Conclusions and Summary
References

참고문헌 (32)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0