메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
신태환 (Kangwon National University) 이상우 (Kangwon National University) 김병희 (Kangwon National University) 서영호 (Kangwon National University)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.29 No.4
발행연도
2020.8
수록면
310 - 316 (7page)
DOI
10.7735/ksmte.2020.29.4.310

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this paper, a gas permeable waterproof film with superhydrophobic characteristics of irregular microstructures and vertical microchannels, is presented. A wet etching technique of aluminum alloys was employed for the preparation of a superhydrophobic surface, and a typical punching technique was used for the fabrication of vertical microchannels. A waterproof film was created via the casting process of polydimethylsiloxane (PDMS). The contact angle of the prepared film was measured as 156°, and the diameter of the vertical microchannel was approximately 100 μm. In the experiment involving maximum liquid entry pressure (LEP) measurement, the LEP of the microtextured PDMS film with 50 vertical microchannels was approximately 16 kPa, whereas the smooth PDMS film could not withstand any pressure. In the long-term reliability test, by using a pressure relief valve of 14 kPa, the fabricated film maintained the water pressure without any leakage.

목차

ABSTRACT
1. 서론
2. 본론
3. 결론
References

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-003-001085244