지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.8
- 수록면
- 342 - 348 (7page)
이용수
초록· 키워드
오류제보하기
Demands for weight reduction in automobiles have been constantly increasing due to its environmental impact, leading to increased interests in light metals such as aluminum and magnesium. However, for most structural applications that require large energy absorption, implementation of high strength steel is still a pervasive solution.
When the high strength steel having a high martensite fraction (DP 980) is joined by resistance spot welding, a softening zone is generated in the welds, leading to the reduction of the strength of the welds. In addition, high strength steels generally contain a large amount of carbon and alloying elements. As a result, the carbon equivalent exhibiting hardenability increases, having the welded part become weak, and making it difficult to secure the performance required by the part or the vehicle body.
Vaporizing foil actuator welding (VFAW) which is one of the solid-state welding techniques utilizes a high-pressure pulse generated by the vaporization of an aluminum foil to cause high speed collision of flyer and target sheets to create solid-state bonds with negligible melting at the weld interface. So, VFAW produces joints with little to no HAZ.
In this study, to examine the vaporizing foil actuator welding properties of 1 GPa grade high strength steel, microstructure analysis and hardness test were performed. The test results were compared with the resistance spot welding properties of the same material.
When the high strength steel having a high martensite fraction (DP 980) is joined by resistance spot welding, a softening zone is generated in the welds, leading to the reduction of the strength of the welds. In addition, high strength steels generally contain a large amount of carbon and alloying elements. As a result, the carbon equivalent exhibiting hardenability increases, having the welded part become weak, and making it difficult to secure the performance required by the part or the vehicle body.
Vaporizing foil actuator welding (VFAW) which is one of the solid-state welding techniques utilizes a high-pressure pulse generated by the vaporization of an aluminum foil to cause high speed collision of flyer and target sheets to create solid-state bonds with negligible melting at the weld interface. So, VFAW produces joints with little to no HAZ.
In this study, to examine the vaporizing foil actuator welding properties of 1 GPa grade high strength steel, microstructure analysis and hardness test were performed. The test results were compared with the resistance spot welding properties of the same material.
목차
Abstract
1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusions
Reference
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Impact Welding of 1㎬ Grade High Strength Steels by Vaporizing Foil Actuators
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
-
고강도강 및 알루미늄의 이종소재 접합을 위한 standoff-free Vaporizing Foil Actuator Welding 공정
한국소성가공학회 학술대회 논문집
2021 .05
-
Vaporizing Foil Actuator Welding process for welding dissimilar materials utilizing carbon fiber reinforced plastic and aluminum
한국소성가공학회 학술대회 논문집
2021 .11
-
Vaporizing Foil Actuator Welding process for welding dissimilar materials : Carbon fiber Reinforced Plastic and aluminum
한국생산제조학회 학술발표대회 논문집
2020 .12
-
The interfacial structure and mechanical properties of three aluminum-steel dissimilar stack-ups welded by vaporizing foil actuator
대한용접학회 특별강연 및 학술발표대회 개요집
2024 .10
-
1470 MPa 급 강판의 도금 및 표면 상태에 따른 기화호일용접 특성 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
Dissimilar material welding of CFRP-aluminum by utilizing Vaporizing Foil Actuator Welding process
한국소성가공학회 학술대회 논문집
2022 .12
-
Multi-layer Dissimilar Material Welding process by Utilizing Vaporizing Foil Actuator Welding
한국소성가공학회 학술대회 논문집
2023 .11
-
차체용 1.2㎬급 초고장력 TRIP강판의 저항 점 용접 강도 예측에 관한 연구
대한용접·접합학회지
2018 .02
-
고탄소강 마찰용접부 미세조직 및 기계적 성질에 대한 연구
대한용접·접합학회지
2023 .12
-
시뮬레이션을 통한 1500MPa급 강재의 저항 용접 특성 (I) : 저항 점 용접의 로브곡선 특성 분석
대한용접·접합학회지
2018 .06
-
Joint Properties of Dissimilar Al/Steel Sheets Formed by Magnetic Pulse Welding
대한용접·접합학회지
2020 .08
-
Effect of welding condition on distribution of microstructure and hardness of resistance spot welded BH340 steel
한국소성가공학회 학술대회 논문집
2021 .05
-
고장력강 파이버 레이저 용접부의 HAZ 연화 특성에 관한 연구
대한용접·접합학회지
2015 .12
-
건설용 강재개발 및 용접기술동향
대한용접·접합학회지
2016 .02
-
알루미늄과 구리 박판의 다층 초음파 용접특성 분석
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .04
-
1180MPa급 강판 대상 점용접 및 레이저 용접 대체를 위한 다양한 아크 플러그 형상 용접부 접합강도 및 접합특성 비교 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2021 .05
-
Numerical analysis of resistance element welding of aluminum alloy and advanced high strength steel sheets
한국자동차공학회 춘계학술대회
2020 .07
-
Characteristics of welding residual stress distribution in weld joints effect of phase transformation with high-strength steel
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
-
312계 용가재 적용에 따른 XM-19 스테인리스강 용접부 미세조직 및 기계적 성질
대한용접·접합학회지
2025 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0