메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
류운영 (경희대학교 공과대학 섬유공학과) 허유 (경희대학교 공과대학 섬유공학과) 박세웅 (경희대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제17권 제4호
발행연도
1980.1
수록면
1 - 11 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Tensile properties of spun yarn can be evaluated from lea strength and single end strength. In this paper, lea strength and single end strength with varying yarn counts and twists were measured experimentally and also relationships between lea strength and single end strength were investigated in various yarns. In the given TM (twist multiplier) 3.2-4.8, maximum strength and minimum strength CV% were found to occur at the level of TM 4.0-4.4 in CD (carded yarn) 20's, CD3O's and at a point of TM 4.0 in CM (combed yarn) 40's ring-spun cotton yarn. Regression coefficient increased as the count of ringspun cotton yarn became higher (fewer fibres per cross section) and increased as the level of TM in this yarn became higher or lower than optimum TM, which could be explained by the fact that single end strength variation became higher as TM deviated from the optimum value. In the Open-End yarn, strength CV% and regression coefficient decreased as the yarn became finer.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0