메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
이무석 (서울대학교 공과대학 섬유고분자공학과) 오태환 (서울대학교 공과대학 섬유고분자공학과, 숭실대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제33권 제8호
발행연도
1996.1
수록면
742 - 750 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In melt spinning process of polypropylene hollow fiber, the effects of spinning conditions such as flow rate, die temperature, take-up speed on the diameter and hollowness of spun fibers were studied. For the spinneret of melt spinning, segmented arc type was used and the effect of air flow rate which dragged in hollow part of fibers was considered by taking account of extrudate swell from this type of spinneret. Experimental results show that when the flow rate, die temperature and take-up speed increase, the hollowness of spun fibers decreases. The development of hollow fiber characteristic along the spinline was investigated by the simulation of fiber forming process in which boundary conditions were determined experimentally. In this simulation hollowness of fiber along the spinline decreased and this trends were verified by experiment. In the simulation of spinning of hollow fibers, the freezing point distance is shorter than that of solid fibers and stress at freezing point is larger than that of solid fibers under the same spinning conditions.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0