메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김진우 (창원대학교 공업화학과) 이상민 (창원대학교 공업화학과) 오영세 (한일합섬[주] 기술연구소)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제34권 제6호
발행연도
1997.1
수록면
337 - 342 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The fibers containing primary amino groups were prepared by reacting PAN fiber with ethylene diamine (EDA). This aminated PAN fibers was finally modified with cellulose acetate (CA) in the presence of hexamethylene diisocyanate (HDI) as binder The amine content of PAN fibers was 0.012∼0.327 meq/g, and the maximum amice content of PAN fibers was obtained after 18 hrs of amination. The finally modified PAN fibers contained less than leyc of CA. The storage modulus of final PAN fiber in glassy state was decreased, but increased in rubbery state after modification. As EDA and CA was introduced Into PAN fibers, Tg's were slightly shifted to lower temperature. In the SEM micrographs the surface of aminated PAN fibers became coarse, but the surface of the final PAN fibers containing CA did smoother than that of original fiber. The modification enhanced the Young's modulus of PAN fiber. While the aminated PAN fiber showed stress-hardening behavior at large deformation, the final PAN fiber modified with CA did low yield behavior as well as thermoplastic deformation.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0