지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2000.1
- 수록면
- 64 - 68 (5page)
이용수
초록· 키워드
오류제보하기
This paper describes the mechanical properties and oxidation resistance of carbon fibers with and without additions of boron oxide additives, and describes the changes in the properties resulting from increased heat treatment temperature (HTT) of the fibers. Carbon fibers in this experiment were heat treated up to $2800^{\circ}C$ each with and without boron oxide treated on the surface of fibers. In the case of boron oxide added carbon fibers, they do not show the improvement of tensile strength and modulus compared to those of no treated carbon fibers below $2200^{\circ}C$ since they are doped substitutionally with boron above $2600^{\circ}C$, which accelerate the graphitization of carbon fibers. Boron oxide implanted carbon fibers showed high resistance to oxidation, however, when carbon fibers were heat treated below $2200^{\circ}C$, they showed almost the same trend of air oxidation.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy
Carbon letters
2016 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
A Structural Study of the Oxidized High Modulus Pitch Based Carbon Fibers by Oxidation in Carbon Dioxide
Carbon science
2004 .01
-
Catalytic CO Oxidation Over Ni Films Supported by Carbon Fiber
한국진공학회 학술발표회초록집
2012 .02
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
Improvement of CF/ABS Composite Properties by Anodic Oxidation of Pitch based C-type Carbon Fiber
Carbon science
2002 .01
-
Oxidation Resistance and Graphitization of Boron Oxide Implanted Carbon/Carbon Composites
Carbon science
2004 .01
-
An overview of new oxidation methods for polyacrylonitrile-based carbon fibers
Carbon letters
2015 .01
-
Effect of additional heat-treatment temperature on chemical, microstructural, mechanical, and electrical properties of commercial PAN-based carbon fibers
Carbon letters
2011 .01
-
Effect of Post-Heat-Treatment on Various Characteristics of Commercial Pitch-Based Carbon Fibers
Carbon science
2007 .01
-
목질(木質)과 비목질계(非木質系) 섬유(纖維)를 활용한 복합재(複合材) 연구(硏究) - 폴리프로필렌의 섬유장(纖維長)과 공정변수(工程變數)의 영향(影響)을 중심(中心)으로 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Preparation and characterization of isotropic pitch-based carbon fiber
Carbon letters
2013 .01
-
Reaction Rates for the Oxidation of Pitch based Carbon Fibers in Air and Carbon Dioxide Gas
Carbon science
2003 .01
-
Carbon Fibers (II): Recent Technical Trends and Market Prospects of Carbon Fibers
Carbon letters
2008 .01
-
Fabrication of carbon fiber SMC composites with vinyl ester resin and effect of carbon fiber content on mechanical properties
Carbon letters
2017 .01
-
Oxidation Kinetics of Pitch Based Carbon Fibers
Carbon letters
2008 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0