메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
이승구 (충남대학교 공과대학 섬유공학과) 주창환 (충남대학교 공과대학 섬유공학과) 최성신 (충남대학교 공과대학 신소재연구소)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제39권 제1호
발행연도
2002.1
수록면
1 - 13 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Polyetherimide(PEI), high temperature engineering plastic, was electrospun under various spinning conditions. Electrospinning of PEI, dissolved in 1,1,2-trichloroethane, was accomplished with specific ranges of applied voltage, concentration of PEI solution, and TCD(tip-to-collector distance). Diameters of electrospun PEI fibers were strongly influenced by the concentration of spinning solution. Voltages higher than 10 kV induced fiber formation in electrospinning and higher voltage gale somewhat narrower diameter fibers. Proper TCD longer than 10 cm resulted in mainly fibers, while short TCD of 5cm, left bead shaped products due to the insufficient gap to jet fibers. The addition of carbon black to spinning solution changed the electrospinning behavior of PEI greatly by altering the solution conductivity. Addition of carbon black induced narrower diameter(mainly several hundred nm scale) fibers under the same electrospinning conditions compared with pure PEI solution. The resultant diameter distribution of electrospun fiber was evaluated by SEM observation.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0