메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
이선희 (부산대학교 섬유공학과) 조현혹 (부산대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제39권 제5호
발행연도
2002.1
수록면
553 - 562 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
Poly(butylene terephthalate) fibers were prepared by high speed melt spinning in the range of 4~8 km/min and annealed under various conditions. The efforts of annealing temperature and tension on the fine structure and properties of PBT fibers were investigated using density, birefringence, WAXD, TMA, tensile test, etc. In the case of PBT fiber annealed under taut conditon, the results of WAXD profiles indicated that (100) plane was inclined relative to the fiber axis, and we confirmed that the reflection peak varied with the inclination of the fiber axis from 2$^{\circ}$ to 8$^{\circ}$ In the TMA results of PBT fibers annealed at various temperatures, shrinkage tendency suggested that crystallization prevailed over chain re-coiling. In the s-s curves results, the elongation of the PBT fibers annealed below 10$0^{\circ}C$ is increased and the specific stress is similar. Especially, in the case of PBT fiber spun at 4 km/min, higher annealing temperatures resulted in an increased work of rupture.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0