메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김범준 (서울대학교 공과대학 섬유공학과) 이재곤 (서울대학교 공과대학 섬유공학과, 서울대학교 공과대학 섬유공학과) 강태진 (Dept. of Colour Chemistry and Dyeing, The University of Leeds, Leeds, U.K.)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제26권 제2호
발행연도
1989.1
수록면
1 - 8 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The micromechanics of 3-D braided preform by 3 $\times$1 pattern has been analyzed Based on the actual yarn paths and interlacing patterns, geometric relations between the structural parameters are analytically established. Analysis of the yarn paths during one repeat of the preform gives the number of different groups of the yarn with the same pattern in the structure which will in turn decide the yarn types used in the formation of hybrid composites where several different types of yarns are used. Observation of the preform surface cut at an angle of 18$^{\circ}$gives the interlacing pattern of the yarns and the critical condition of jamming in all directions has been determined with the critical orientation angle of 54$^{\circ}$which is smaller than that 1 $\times$1 pattern preform which is calculated as 60$^{\circ}$. This difference in critical orientation angle will result in difference in physical properties of the composites. The maximum yarn volume fraction was determind to be 63.4% which is smaller than 78.5% of 1 $\times$1 pattern preform. The validity of the analytical model was examined by testing the preforms braided with several different high performance fibers.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0