메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
오상균 (서울대학교 공과대학 섬유공학과) 육지호 (서울대학교 공과대학 섬유공학과) 하완식 (Dept. of Colour Chemistry and Dyeing, The University of Leeds, Leeds, U.K.)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제28권 제4호
발행연도
1991.1
수록면
52 - 63 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
High molecular weight poly(ethylene terephthalate) (PET) was prepared by using a modified postpolycondensation method. Gelation temperature(아 and gel melting temperature (Tt) of PET-nitrobenzene gel were measured, and gel forming process and non-isothermal c.ystallization behavior were investigated. and 75, was increased with increasing concentration of PET and decreased with increasing molecular weight of the polymer. The crystallization rate was decreased with increasing molecular weight and concentration. The high molecular weight PET in phenol/tetrachloroethane (614%) was cast onto film. Optimum critical concentration in the solvent casting was determined by viscosity measurement, and it was found that this concentration was decreased with increasing molecular weight of the polymer. The solvent cast film exhibited almost same modulus, but its tensile strength was increased with increasing molecular weight of the polymer.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0