메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
백광식 (부산대학교 공과대학 섬유공학과) 원희정 (부산대학교)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제28권 제6호
발행연도
1991.1
수록면
50 - 59 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In order to investigate the change of the fine structure by drawing of POY PET filaments, each sample was drawn at below TR(75$^{\circ}C$), TR(82$^{\circ}C$), and above TR(9$0^{\circ}C$). to the desired draw ratio. The change of the fine structure caused by different drawing conditions (draw ratio and temperature) was studied by measuring crystallinity, X-ray diffraction, dynamic viscoelasticity, birefringence and thermal behaviour. The conclusions obtained from this study are as follows 1. At the same drawing temperature, the degree of crystalliniter hifringonce, TR, Tm, and heat of fusion(AUm) increased with the draw ratio. 2. At the same drawing temperature, the X-ray diffraction pattern displayed sharper peaks with increasing draw ratio, while at the same draw ratios(D/R: 2 and D/R: 3), the X-ray pattern was sharper for the sample drawn at 75$^{\circ}C$ than that drawn at 82$^{\circ}C$ and 9$0^{\circ}C$. 3. At the same drawing temperature, the decrease in the intensity of the tan 6 peak and the shift of the peak position toward higher temperature were observed with increasing draw ratio. At the same draw ratio (DIR: 3) , the lateral order of the amorphous region seemed to increase appreciably for the sample drawn at 75$^{\circ}C$ than that drawn at 82$^{\circ}C$ and 9$0^{\circ}C$.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0