지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Analysis of Dynamic Characterisocs of Rectangular Plate by Finite Element Method. Dynamic characteristics of a rectangular plate with opening in it is studied by finite element method. To investigate these characteristics 12 degrees of freedom membrane finite element in used. The rectangular membrane finite elements are defined by specifying geometry, internal displacement functions and strain-displacement relations. Then, the governing equation for the finite element is derived by energy method. To derive the mass matrix and stiffness matrix of the element, expressions for strain and kineic energy in terms of the node displacement are generated. In constructing the overall structure matrix, the matrix of each elements are superposed and partitioned by applying the given boundary condition to obtain a nonslngular matrix. To find the natural freguencies and viration modes, the eigen values and the corresponding eigen vectors are computed by the computer using well known Jacobi power method. In order to verify the capability of the membrane finite element, a flat rectangular plate is analyzed first, and the result is compared with well known analytical results to show the good agreement. A rectangular plate with opening in It is analyzed with the same finite element. The results are presented in this paper. Unfortunately, the literature study could not provide with some results to compare, but the results reveal that the output of this research is phlslcally reasonable. And the results of this research are useful not only in practice but also for the future experimental research in comparison purpose.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
반복응력도-변형도관계를 기본으로 한 강구조 부재단면의 탄소성 해석 ( Elastic-plastic Behavior of Structural Steel Section Under Alternating Loadings )
대한건축학회 학술발표대회 논문집 - 구조계
1984 .10
-
4. 유한요소법(Finite Element Method)
대한토목학회지
1988 .06
-
유한요소법 ( I ) ( Finite Element Method )
대한기계학회지
1973 .09
-
전결부를 갖는 평판의 고유진동 해석 ( Free Vibration Analysis of Rectangular Plates with Cutouts )
대한건축학회 학술발표대회 논문집 - 구조계
1988 .10
-
유한요소법의 과거, 현재와 미래
대한기계학회 춘추학술대회
2018 .12
-
The use of the strain approach to develop a new consistent triangular thin flat shell finite element with drilling rotation
Structural engineering and mechanics : An international journal
2018 .01
-
3차원 판구조물 해석을 위한 삼각형요소와 사각형 요소의 비교에 관한 연구
한국자동차공학회 지회 학술대회 논문집
2002 .06
-
Closed form solutions for element equilibrium and flexibility matrices of eight node rectangular plate bending element using integrated force method
Structural engineering and mechanics : An international journal
2011 .01
-
[論文] 有限要素法을 利用한 코오드-고무 複合板의 動的特性에 關한 硏究
오토저널
1986 .06
-
Geometrically non-linear dynamic analysis of plates by an improved finite element-transfer matrix method on a microcomputer
Structural engineering and mechanics : An international journal
1994 .01
-
판과 쉘의 선형탄성해석에서 저차고체요소의 성능 비교연구
대한건축학회 학술발표대회 논문집 - 구조계
2003 .04
-
Analysis of the 3-D Stress Wave in a Plate under Impact Load by Finite Element Method
International Journal of Precision Engineering and Manufacturing
2001 .07
-
Analysis of composite plates using various plate theories -Part 2: Finite element model and numerical results
Structural engineering and mechanics : An international journal
1998 .01
-
Modified finite element-transfer matrix method for the static analysis of structures
Structural engineering and mechanics : An international journal
2012 .01
-
A new finite element based on the strain approach with transverse shear effect
Structural engineering and mechanics : An international journal
2014 .01
-
개구부가 있는 장방형판의 응력해석에 관한 연구 ( A Study on the Stress Analysis of Rectangular Plate with Opening )
대한건축학회 학술발표대회 논문집 - 구조계
1988 .04
-
유체와 연성된 두 직사각형 평판의 유한요소 해석
한국정밀공학회 학술발표대회 논문집
2001 .10
-
저차고체요소를 이용한 쉘 구조물의 자유진동해석에 대한 비교연구
대한건축학회 논문집 - 구조계
2005 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0