지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 1993.1
- 수록면
- 57 - 65 (9page)
이용수
초록· 키워드
오류제보하기
The aim of this research was to manufacture sludge-particle board using paper sludge with wood particle and to investigate physical and mechanical properties of various sludge-particle boards, fabricated with ratios of sludge to particle of 10 to 90, 20 to 80, 30 to 70, 40 to 60 and 50 to 50(oven dry weight based). Sludge-particle boards were manufactured by urea-formaldehyde resin, 0.8 target specific gravity, and 10mm thickness. It was possible to manufacture sludge-particle board as the same processing in the present particleboard manufacturing system. This sludge-particle board have different properties as composition ratios of sludge and particle. And sludge-particle board made from 10 percent to 20 percent of sludge mixing ratio have similar mechanical properties compared with control particleboard. Especially, the sludge-particle board made from 10 percent to 40 percent mixing ratios of sludge have superior to control particleboard in internal bond, screw withdrawal holding strength and modulus of elasticity. In the case of dimensional stability, water absorption was increased and thickness swelling was decreased as increased with sludge mixing proportion. The sludge-particle board made of different mixing ratios of our laboratory design was able to concluded that there is possibility of partial substitution of wood particle materials.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
제지 슬러지-목재 파티클 혼합보드의 내화성과 기계적 성질
목재공학(Journal of the Korean Wood Science and Technology)
1994 .01
-
한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 제조연구(製造硏究) - I. 한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 물리적(物理的) 성질(性質)
목재공학(Journal of the Korean Wood Science and Technology)
2001 .01
-
Physical and Mechanical Properties of Sludge-Particle Board Manufactured by Composition Types and Composition Ratios from Mixed or Layered Paper Sludge and Wood Particle
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Electron Paramagnetic Resonance Studies of Nanocrystalline CoGdxFe2-xO₄ Particles
한국자기학회 학술연구발표회 논문개요집
2008 .12
-
제지(製紙) 슬러지-시멘트보드이 제조가능성(製造可能성)에 관(關)한 연구(硏究)(II) - 물리(物理)·기계적(機械的) 성질(性質) 및 SEM 측정(測定) -
목재공학(Journal of the Korean Wood Science and Technology)
1994 .01
-
한지슬러지-목재섬유 복합보드의 제조연구 II. 한지슬러지-목재섬유 복합보드의 기계적 성질
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
제지 슬러지의 첨가가 요소수지 파티클보드의 포름알데히드 방산 및 물리적, 기계적 성질에 미치는 영향
목재공학(Journal of the Korean Wood Science and Technology)
1994 .01
-
제지(製紙) Sludge-Cement Board의 제조가능성(製造可能性)에 관(關)한 연구(硏究)(I) -수화반응(水和反應)에 의(依)한 경화장해지수측정(硬化障害指數測定)-
목재공학(Journal of the Korean Wood Science and Technology)
1993 .01
-
한지슬러지-목재섬유 복합보드의 제조연구 I. 한지슬러지-목재섬유 복합보드의 물리적 성질
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
석탄과 슬러지의 혼합연소에 따른 수은 배출 특성
한국대기환경학회지(국문)
2012 .04
-
Development of Nanocrystalline CoGdxFe2-xO₄ Particles and its Applications
한국자기학회 학술연구발표회 논문개요집
2008 .12
-
산업유기성 슬러지 처리를 위한 고효율 패들식 슬러지 건조기 개발
한국대기환경학회 학술대회논문집
2007 .05
-
슬러지 혼합 비율에 따른 연소가스 중 SOx, NOx의 농도변화
한국대기환경학회 학술대회논문집
2014 .10
-
위생용지 생산 제지공장 폐수슬러지의 처리 현황
한국습지학회지
2013 .01
-
제지공장의 폐재인 Sludge로 부터 합성 Board의 제조
목재공학(Journal of the Korean Wood Science and Technology)
1987 .01
-
Effects of Density, Resin and Particle Types on Properties of Composites from Wood Particle Mixed with Coating Paper
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
A Comparative Analysis of Two Different Wastewater Treatment Processes in Actual Wastewater Treatment Plants
Quantitative Bio-Science
2018 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0