지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2014.1
- 수록면
- 159 - 164 (6page)
이용수
초록· 키워드
오류제보하기
Purpose: The purpose of this study was analysis of quality of fixed prostheses fabricated by dental CAD/CAM system. Methods: The ten same cases of stone models were manufactured by dental scannable model, and stone models were scanned using the dental scanner for changing digital model. Ten digital models were completed. The design of zirconia core for zirconia based all-ceramic crown was conducted by the dental CAD program. The samples were fabricated using the pre-sintered zirconia block by dental milling machine. Marginal gaps were analyzed using by silicone replica technique at the eight parts for quality analysis of samples. One-way ANOVA was used for statistical analysis(${\alpha}=0.05$). Results: The mean for marginal gaps were $93.2{\sim}99.1{\mu}m$ at the eight parts. One-was ANOVA didn't show significant differences(p=0.089). Conclusion: The fixed dental prostheses fabricated by dental CAD/CAM were within clinically acceptable range.
목차
등록된 정보가 없습니다.
참고문헌 (10)
참고문헌 신청
Anusavice KJ / 2003 / Phillips science of dental materials / W.B. Saunders :621~654
Bindl A / 2005 / Marginal and internal fit of allceramic CAD/CAM crown-copings on chamfer preparations / J Oral Rehabil 32:441~447
Christensen GJ / 2009 / Impressions are changing:deciding on conventional, digital or digital plus in-office milling / J Am Dent Assoc 140:1301~1304
Coli P / 2004 / Precision of a CAD/CAM technique for the production of zirconium dioxide copings / Int J Prosthodont 17:577~580
김지환 / 2012 / 쾌속 조형 기술을 이용하여 제작된 3본 고정성 보철물의 적합도 평가 / 대한치과기공학회지 34(2):105~111
Bindl A / 2005 / Marginal and internal fit of allceramic CAD/CAM crown-copings on chamfer preparations / J Oral Rehabil 32:441~447
Christensen GJ / 2009 / Impressions are changing:deciding on conventional, digital or digital plus in-office milling / J Am Dent Assoc 140:1301~1304
Coli P / 2004 / Precision of a CAD/CAM technique for the production of zirconium dioxide copings / Int J Prosthodont 17:577~580
김지환 / 2012 / 쾌속 조형 기술을 이용하여 제작된 3본 고정성 보철물의 적합도 평가 / 대한치과기공학회지 34(2):105~111
이 논문의 저자 정보
최근 본 자료
댓글(0)
0