메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
송준영 (숭실대학교 유기신소재.파이버공학과) 정연수 (숭실대학교 유기신소재.파이버공학과) 함민경 (숭실대학교 유기신소재.파이버공학과) 곽영제 (숭실대학교 유기신소재.파이버공학과) 정영진 (숭실대학교 유기신소재.파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제49권 제3호
발행연도
2012.1
수록면
169 - 173 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Calcium carbonate ($CaCO_3$) with 15~40 nm average diameter was compounded with polypropylene (PP) in a melted state to form composite materials. To enhance the dispersibility in PP, the surface of the $CaCO_3$ was coated with hydrophobic stearic acid (SA). The SA-coated $CaCO_3$ (SA-$CaCO_3$) showed hydrophobic nature, which resulted in rapid precipitation in water. When melt-compounded with PP, SA-$CaCO_3$ was uniformly distributed throughout the PP matrix, while the uncoated $CaCO_3$ formed aggregated structures in the PP. At up to 5 wt% of SA-$CaCO_3$ content, the composites showed well-dispersed structure, although some level of aggregation was observed in the composites with 10 wt% of SA-$CaCO_3$. The dispersibility improved with a repeated process of compounding. The melting and crystallization temperatures of PP increased with incorporation of $CaCO_3$. The enthalpy of the transitions also increased and the full-width of half maximum of the crystallization peak decreased. However, SA-coating did not produce additional effects on the crystallization behavior of PP. These results showed that the $CaCO_3$ acted as crystal nuclei.

목차

등록된 정보가 없습니다.

참고문헌 (12)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0