메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
임정호 (경희대학교 대학원 섬유공학과) 간바트 (경희대학교 대학원 기계공학과) 허유 (경희대학교 공과대학 기계공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제50권 제3호
발행연도
2013.1
수록면
149 - 157 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This research determines the traits of bundle twists that appeared on the bundle surface, while the input fiber fleece is transformed to a bundle by using friction drums. A mathematical model is suggested to describe the twists generated in the friction area. Based on the bundle thickness dynamics, which is supposed to determine the geometrical array of the fibers joined layer by layer on the outer surface of an in-process bundle that rotates about the bundle axis, twists on the bundle surface are mathematically described, taking into account the bundle-drum slippage ratio, fiber fleece-feeding angle, and friction ratio. Twists are expressed in terms of the number of twists per length and the twist angle. Results show that the slippage ratio has a significant influence on the number of twists per length, but its influence on the twist angle is minimal. The fleece-feeding angle appears to be an important factor in deciding the twists. In addition, a critical fleece-feeding angle that corresponds to an angle that changes the twist direction could be determined. The friction ratio is positively related to the bundle twists, i.e., the twist number increases linearly with increasing friction ratio. However, the friction ratio is negatively related to the twist angle, i.e., at low friction ratios, the twist angle changed significantly, whereas a high friction ratio led to an almost constant twist angle.

목차

등록된 정보가 없습니다.

참고문헌 (13)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0