메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박찬호 (숭실대학교 유기신소재.파이버공학과) 김주용 (숭실대학교 유기신소재.파이버공학과) 심현주 (숭실대학교 유기신소재.파이버공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제52권 제4호
발행연도
2015.1
수록면
254 - 257 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In a previous work, the causes of skewness in single jersey fabric produced on a circular knitting machine were analyzed from two aspects, namely, the machine characteristics and the yarn torsional properties. For practical reasons, the skewness caused by the machine (feeding skewness) could not be reduced, thus making it necessary to control the yarn torsion. One way of counterbalancing the yarn torsion was to alternately feed the S- and Z-twisted yarns into the knitting machine, while another method relied on using S- and Z-twisted single yarns plied together and fed through the same feeder. The results showed that a knit fabric made using plied yarn could reduce skewness. However, the hand is hard and not appropriate for this purpose. The method relying on the combined feeding of S- and Z-twisted yarn could improve the skewness while producing a pleasant touch and appearance. Nevertheless, production costs should be considered. Finally, the method relying on the alternate feeding of S- and Z-twisted yarn produced no skewness. Unfortunately, however, the fabric had a harsh appearance and was unpleasant to the touch. Taking the production costs and fabric properties into account, the use of steam set yarn is thought to offer the most practical solution.

목차

등록된 정보가 없습니다.

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0