메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Chae, Dong-Wook (Department of Textile Engineering, Kyungpook National University) Lim, Jung-Ho (Division of Applied Chemical & Bio Engineering, Hanyang University) Seo, Jae-Sik (Division of Applied Chemical & Bio Engineering, Hanyang University) Kim, Byoung-Chul (Division of Applied Chemical & Bio Engineering, Hanyang University)
저널정보
한국유변학회 Korea-Australia rheology journal Korea-Australia rheology journal 제24권 제1호
발행연도
2012.1
수록면
45 - 52 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Nylon-66 was melt compounded with 5 wt% nanosized organoclay varying the mixing rate and mixing time and their effects on the structure and properties of the nanocomposites were discussed in terms of the dispersion state of nanoclay. For the preparation of the nanocomposites, the total apparent shear (mixing rate${\times}$mixing time) was fixed to 450 at three different combinations of mixing rate (30, 60, 90 rpm) and mixing time (5, 7.5, 15 min). While the pristine organoclay showed a (001) peak at $2{\theta}=4.9^{\circ}$ in the WAXD patterns, nylon-66/clay nanocomposites gave the disappearance of the peak regardless of mixing conditions, suggesting an exfoliated clay morphology in the nylon 66 matrix. The exfoliation of nanoclay in the nylon-66 matrix was also demonstrated by TEM measurements. On the contrary, rheological measurements revealed that the dispersion state of nanoclay was significantly influenced by the preparation conditions. The dynamic viscosity (${\eta}$) of nylon-66/clay nanocomposites was increased as mixing rate was increased. For the normalized viscosity (${\eta}{\prime}(t)/{\eta}{\prime}(0)$) obtained by time sweep at a given frequency, all the nanocomposites presented a decreased and upturned trend at the measuring time of ca. 500 s, while nylon-66 showed an increased one over the entire time range. Nylon-66/clay nanocomposites gave lower value of tan${\delta}$ with increasing mixing rate. In the logarithmic plot of storage modulus versus loss modulus, the nanocomposites prepared at higher mixing rate gave smaller slope, indicative of an increased heterogeneity. Nanoclay played a role of nucleating agent for nylon-66 by increasing the crystallization temperature, which was more pronounced at lower mixing rate. The induction time rheologically obtained from time sweep measurement at 1 rad/s at $235^{\circ}C$ was shorter for the nanocomposites prepared at lower mixing rate, but at 3 rad/s it was little affected by the preparation conditions.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0