메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Bae, Won-Sik (Department of Organic and Nano Engineering, Hanyang University) Kwon, Oh-Joo (Department of Organic and Nano Engineering, Hanyang University) Kim, Byoung-Chul (Department of Organic and Nano Engineering, Hanyang University) Chae, Dong-Wook (Department of Textile Engineering, Kyungpook National University)
저널정보
한국유변학회 Korea-Australia rheology journal Korea-Australia rheology journal 제24권 제3호
발행연도
2012.1
수록면
221 - 227 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The polyamide-based thermoplastic elastomers (Pebax$^{(R)}$) were melt compounded with multi-walled carbon nanotubes (MWNTs: 0.25~5 wt%) and the variation of rheological and physical properties with MWNT contents was investigated. The crystallization temperature ($T_c$) of the nanocomposites with 0.5 wt% MWNTs was most increased by ca. $8^{\circ}C$, but it was decreased by further addition. In addition, the presence of MWNTs broadened the $T_c$ peak with increasing nanotube contents. In contrast, the melting behavior was little influenced by the presence of MWNTs for all compositions. The incorporation of MWNTs increased the complex viscosity with MWNT contents and the abrupt increase was observed from 1 wt%. In addition, lower Newtonian flow region became disappearing with increasing MWNT contents, exhibiting notable shear thinning behavior from 1 wt% loading. Storage modulus was increased with MWNT contents in a similar manner to viscosity. Casson plot demonstrated a non-zero positive intercept for all the samples. In particular, the abrupt increase of yield stress was observed from 1 wt% loading. In the Cole-Cole plot, the nanocomposites gave a deviated curve from pure Pebax and the slope was decreased with increasing MWNT contents. The relaxation time calculated from viscoelastic parameters was increased with nanotube contents, but the increasing extents were reduced with increasing frequency. From 2 wt% MWNTs, the electrical conductivity was observed, indicating that the electrical percolation existed between 1.5 and 2 wt%. At 0.25 wt% loading the tensile strength was slightly increased, but it was gradually decreased by further addition. The introduction of MWNTs increased the tensile modulus with nanotube contents. In addition, ductile properties were reduced with increasing MWNT contents, resulting in low toughness.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0