지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Recently, a lot more disasters in the temporary structures happen because the stabilities of the temporary structures are disregarded by the reduction of the unit cost, using defective materials, the existing materials and so on. Pipe supports, which are one of the temporary structures, are basically used for the most constructing works such as buildings, bridges, plants and so on. In the most sites, adequate support installations of the pipe supports have not been performed although the presence of the guideline legally and institutionally. In this study, therefore, the collapse accidents of the pipe supports were investigated on the basis of theoretical analysis as well as the buckling tests by simulating the site support condition. Both the theocratical analysis and test results show that the buckling load in the fixed ends is at least 4 times larger than one in the pinned ends. This results will be utilized for safety assurance as well as accident prevention the in the field application.
목차
등록된 정보가 없습니다.
참고문헌 (10)
참고문헌 신청
Ministry of Employment and Labor / 2014 / Current Status of the Industrial Accident
H.S. Kim / 2000 / The Evaluation of the Safety of Formwork System Considering the Continuous Collapse / Industrial Scientific Research 18(1):197~204
F. C. Hadripriono / 1986 / Analysis of Cause of Falsework Failures in Concrete Structures / Journal of Construction Engineering and Management 112(1):112~121
Y. O. Lee / 2001 / A Proposed method of the Strength Calculation of Pipe Support / Journal of the Korean Society of Safety 16(1):59~64
H. S. Kim / 2004 / The Study on the Collapse Cause Analysis of the Shore System because of the Design and Construction Deficiencies / Industrial Scientific Research 21(2):213~220
H.S. Kim / 2000 / The Evaluation of the Safety of Formwork System Considering the Continuous Collapse / Industrial Scientific Research 18(1):197~204
F. C. Hadripriono / 1986 / Analysis of Cause of Falsework Failures in Concrete Structures / Journal of Construction Engineering and Management 112(1):112~121
Y. O. Lee / 2001 / A Proposed method of the Strength Calculation of Pipe Support / Journal of the Korean Society of Safety 16(1):59~64
H. S. Kim / 2004 / The Study on the Collapse Cause Analysis of the Shore System because of the Design and Construction Deficiencies / Industrial Scientific Research 21(2):213~220
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
재사용 파이프서포트(V2)의 품질관리 향상에 관한 연구
한국안전학회지
2019 .01
-
단관 파이프의 좌굴특성에 대한 수평연결재 및 기울기의 영향
한국안전학회지
2015 .01
-
아치형 비닐하우스 구조의 해석정밀도에 따른 좌굴특성 연구
한국공간구조학회지
2015 .01
-
퇴화 쉘요소를 사용한 원통형 복합재 패널의 비선형 좌굴후 현상해석
한국생산제조학회지
2018 .12
-
Comparative study between inelastic compressive buckling analysis and Eurocode 3 for rectangular steel columns under elevated temperatures
Steel and Composite Structures, An International Journal
2022 .05
-
Analytical study of buckling profile web stability
Structural engineering and mechanics : An international journal
2015 .01
-
조립된 가설 구조물의 좌굴 안전성 판별을 위한 인공지능 알고리즘 개발
한국강구조학회 학술대회 발표집
2023 .06
-
Thermal Impact Evaluation on Buckling of Cylindrical Structures Using Shell Elements
한국기계가공학회지
2021 .01
-
Buckling Characteristics of Skin-Stringer Composite Stiffened Panel
항공우주시스템공학회지
2020 .12
-
가설구조물 안전성 확보 방안 연구
한국안전학회지
2018 .01
-
Buckling of Patterned Top Films
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
Buckling and Post buckling Analysis of Composite Plates with Internal Flaws
International Journal of Aerospace System Engineering
2015 .12
-
Buckling analysis of steel plates in composite structures with novel shape function
Steel and Composite Structures, An International Journal
2020 .01
-
Study on thermal buckling and post-buckling behaviors of FGM tubes resting on elastic foundations
Structural engineering and mechanics : An international journal
2018 .01
-
엔진 폭발하중을 고려한 커넥팅로드의 좌굴해석에 관한 연구
한국기계기술학회지
2015 .01
-
파형 강판 웨브를 갖는 보의 매개변수 해석 연구
한국공간구조학회지
2018 .01
-
Study on thermal buckling and post-buckling behaviors of FGM tubes resting on elastic foundations
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
항공 모빌리티 기체구조 체결 형태에 따른 좌굴 경계조건 평가 연구
항공우주시스템공학회 학술행사 논문집
2024 .10
-
Buckling Load of Columns with Same Volume and Length but Variable Cross-section along the Length
복합신소재구조학회논문집
2015 .01
-
압축 하중을 받는 곡판의 경계 조건에 따른 2차 좌굴 및 최종강도 평가
대한용접·접합학회지
2024 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0