지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2014.1
- 수록면
- 141 - 147 (7page)
이용수
초록· 키워드
오류제보하기
Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.
목차
등록된 정보가 없습니다.
참고문헌 (8)
참고문헌 신청
박희상 / 2012 / Infrared Thermography Characterization of Defects in Seamless Pipes Using an Infrared Reflector / 비파괴검사학회지 32(3):284~290
Celine L / 2002 / Precision granulation as an alternative granulation method
정인성 / 2013 / 도재용착주조관용 Co-Cr합금의 주조성 및 결합강도 관찰 / 대한치과기공학회지 35(2):105~112
구자욱 / 2012 / 열화상 기술을 이용한 치아/복합레진 수복부의 박리 평가 / Composites Research 25(6):236~240
John L. Johnson / 2006 / Injection Molding of Co-28Cr-6Mo / Materials and processed for medical devices :99~103
Celine L / 2002 / Precision granulation as an alternative granulation method
정인성 / 2013 / 도재용착주조관용 Co-Cr합금의 주조성 및 결합강도 관찰 / 대한치과기공학회지 35(2):105~112
구자욱 / 2012 / 열화상 기술을 이용한 치아/복합레진 수복부의 박리 평가 / Composites Research 25(6):236~240
John L. Johnson / 2006 / Injection Molding of Co-28Cr-6Mo / Materials and processed for medical devices :99~103
이 논문의 저자 정보
최근 본 자료
댓글(0)
0