개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 테크노프레스 Structural engineering and mechanics : An international journal Structural engineering and mechanics : An international journal 제68권 제2호
- 발행연도
- 2018.1
- 수록면
- 261 - 275 (15page)
이용수
초록· 키워드
오류제보하기
A comprehensive study was provided to investigate the buckling behavior of the steel plates with and without through-thickness holes subjected to uniaxial compression using ABAQUS. The method was validated by the results reported in the literature. Using the critical stresses, the buckling coefficients ($K_c$) were calculated. The effects of inclusion of material nonlinearity, plate thickness (t), aspect ratio (AR), and initial imperfection on buckling resistance of the plate was studied. Besides, the effects of having the hole in the plate were also studied. The diameter of the hole was normalized by dividing by plate breadth and was given in the form of ${\alpha}$. Results showed that perforating one hole in the center of a plate increases the plate buckling resistance while the having two holes resulted in a decrease in the plate buckling resistance. The effects of hole eccentricity (Ecc) on the buckling resistance of the plate was studied. The position of the hole center was normalized by half of the plate breadth and length in X- and Y-directions, respectively. In this study, four cases of boundary conditions were considered, and the corresponding buckling behavior were studied combined with plate aspect ratio. It was observed that the boundary condition of the case I resulted in the highest buckling resistance. Finally, a comparison was made between the buckling behavior of the uniaxially and biaxially loaded plate. It was revealed that the buckling resistance of a biaxially loaded plate is lower half than half of that of the uniaxially loaded plate.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Buckling and Post buckling Analysis of Composite Plates with Internal Flaws
International Journal of Aerospace System Engineering
2015 .12
-
The critical buckling load of reinforced nanocomposite porous plates
Structural engineering and mechanics : An international journal
2018 .01
-
Buckling analysis of steel plates in composite structures with novel shape function
Steel and Composite Structures, An International Journal
2020 .01
-
The critical buckling load of reinforced nanocomposite porous plates
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
유한요소해석을 이용한 평면 응력을 받는 완전 고정된 판의 좌굴 판단 기준에 대한 연구
대한기계학회 춘추학술대회
2022 .11
-
Study of buckling stability of cracked plates under uniaxial compression using singular FEM
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Buckling Analysis of Rectangular Plates using an Enhanced 9-node Element
ARCHITECTURAL RESEARCH
2016 .09
-
Mechanical and thermal buckling analysis of laminated composite plates
Steel and Composite Structures, An International Journal
2021 .09
-
Effect of crack location on buckling analysis and SIF of cracked plates under tension
Steel and Composite Structures, An International Journal
2020 .01
-
압축 하중을 받는 곡판의 경계 조건에 따른 2차 좌굴 및 최종강도 평가
대한용접·접합학회지
2024 .10
-
A shooting method for buckling and post-buckling analyses of FGSP circular plates considering various patterns of Pores' placement
Structural Engineering and Mechanics, An Int＇l Journal
2023 .02
-
파형 강판 웨브를 갖는 보의 매개변수 해석 연구
한국공간구조학회지
2018 .01
-
A new four-unknown equivalent single layer refined plate model for buckling analysis of functionally graded rectangular plates
Structural Engineering and Mechanics, An Int＇l Journal
2024 .06
-
A novel refined shear deformation theory for the buckling analysis of thick isotropic plates
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Mechanical buckling of functionally graded plates using a refined higher-order shear and normal deformation plate theory
Advances in aircraft and spacecraft science
2018 .01
-
An Approximate Method for the Buckling Analysis of a Composite Lattice Rectangular Plate
International Journal of Aeronautical and Space Sciences
2017 .09
-
Investigation of buckling behavior of functionally graded piezoelectric (FGP) rectangular plates under open and closed circuit conditions
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Stability analysis of transversely isotropic laminated Mindlin plates with piezoelectric layers using a Levy-type solution
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Effect of material transverse distribution profile on buckling of thick functionally graded material plates according to TSDT
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Comparative study between inelastic compressive buckling analysis and Eurocode 3 for rectangular steel columns under elevated temperatures
Steel and Composite Structures, An International Journal
2022 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0