지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.1
- 수록면
- 34 - 38 (5page)
이용수
초록· 키워드
오류제보하기
Multilayered high-temperature superconductor coated conductor (CC) tapes are used in an extensive range of applications and are exposed to many stresses such as hoop stress, radial/transverse tensile stress under large Lorentz forces, and thermal stress while cooling if thermal expansion properties differ. Loads induced transversely at the tape surface inevitably create delamination phenomena in the multilayered CC tapes. Thus, delamination behaviors of CC tapes along the c-axis under transverse loading conditions, which can vary based on manufacturing process and constituent layers, must be characterized for applications. The anvil test method was used to mechanically investigate the delamination characteristics of various commercially available Ag-stabilized CC tapes at room temperature and 77 K, finding superior strength at the latter. The wide variations found depended on tape structure and fabrication technique. Fractographic morphologies of delaminated tapes supported the findings under transverse loading conditions.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Delamination behaviors of GdBCO CC tapes under different transverse loading conditions
한국초전도·저온공학회논문지
2015 .01
-
Enhancement of delamination strength in Cu-stabilized coated conductor tapes through additional treatments under transverse tension at room temperature
한국초전도·저온공학회논문지
2017 .01
-
Characterization of electromechanical properties of Sn-Cu double layer stabilized GdBCO coated conductor tapes at 77 K
한국초전도·저온공학회논문지
2017 .01
-
Effects of differently hardened brass foil laminate on the electromechanical property of externally laminated CC tapes
한국초전도·저온공학회논문지
2016 .01
-
Influence of brass laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes
한국초전도·저온공학회논문지
2016 .01
-
Characteristic responses of critical current in REBCO coated conductor tapes under tensile/compressive bending strains at 77 K
한국초전도·저온공학회논문지
2018 .01
-
Cohesive Zone Model을 이용한 테이프 박리에 대한 유한요소 해석
한국자동차공학회 춘계학술대회
2020 .07
-
Contact resistance characteristics of 2G HTS coils with metal insulation
한국초전도·저온공학회논문지
2018 .01
-
이차 전지용 Strip Tape의 제조와 Tab에 대한 접착 강도 및 전해질 용액에서의 안전성에 관한 연구
한국자동차공학회논문집
2021 .11
-
Optimization of wire construction from several 2G HTS tapes
한국초전도·저온공학회논문지
2019 .01
-
Finite element based dynamic analysis of multilayer fibre composite sandwich plates with interlayer delaminations
Advances in aircraft and spacecraft science
2016 .01
-
The effect of different tape on Flat foot Women
한국산학기술학회 학술대회논문집
2015 .05
-
차량 부품용 양면테이프 박리에 대한 시험 및 해석 Correlation
대한기계학회 춘추학술대회
2022 .11
-
Behaviors of turn-to-turn contact resistance (R<sub>c</sub>) of various REBCO CC tapes according to applied contact pressure
한국초전도·저온공학회논문지
2018 .01
-
Measurement reliability of irreversible stress/strain limits in Sn-Cu double layer stabilized IBAD/RCE-DR processed GdBCO coated conductor tapes under uniaxial tension at 77 K
한국초전도·저온공학회논문지
2018 .01
-
Thermoelastic effect on inter-laminar embedded delamination characteristics in Spar Wingskin Joints made with laminated FRP composites
Steel and Composite Structures, An International Journal
2020 .01
-
Superconducting properties of SiC-buffered-MgB<sub>2</sub> tapes
한국초전도·저온공학회논문지
2015 .01
-
전해 융복합 공정에서 전극 형상별 표면거칠기 분석 연구
한국기계가공학회지
2025 .04
-
우리는 왜 CCS 필요한가?
한국신·재생에너지학회 학술대회 초록집
2015 .06
-
Study on the Effect of Contact Stress of Taping Device on Gear Module
한국기계가공학회지
2025 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0