지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2010.1
- 수록면
- 94 - 100 (7page)
이용수
초록· 키워드
오류제보하기
This study was performed to develop an LRFD (Load Resistance Factored Design) Code for Domestic Larch. To accomplish his, we evaluated bending, compression, tension and shear strength. The results of the strength evaluation were utilized to verify the distribution and code conversion. For bending, tension and compressive strength, the Weibull distribution was well-fitted, but for shear strength we observed a normal distribution. For evaluating the bending and compressive strength, a full-sized specimen was used. A small clear specimen was used to test tension and shear strength. Compressive strength in particular was found to be affected by tight knots, although there was little difference between grades. In the code conversion, the design value of the LRFD was larger than the existing allowable stress value in the Korean Building Code. However, the allowable stress in this study was about two times higher than the value listed in the Korean Building Code. This result induced the difference between the soft and hard conversions. For greater reliability, the accumulation of additional data is necessary and further studies should be performed
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Evaluation of Allowable Bending Stress of Dimension Lumber; Confidence Levels and Size-adjustment
목재공학(Journal of the Korean Wood Science and Technology)
2013 .01
-
Evaluation of Bonding Strength of Larch Cross-Laminated Timber
목재공학(Journal of the Korean Wood Science and Technology)
2016 .01
-
국산 침엽수구조재의 허용응력설정에 관하여 - 1종 구조재를 중심으로 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
목조건축 해체 고목재의 재질특성 및 강도성능
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
Estimation of Depth Effect on the Bending Strength of Domestic Japanese Larch Structural Lumber using Weibull Weakest Link Theory
목재공학(Journal of the Korean Wood Science and Technology)
2014 .01
-
한국산 옻나무의 휨 및 종압축 강도적 성질(I)
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Estimation of System Reliability in Bivariate Weibull Distribution
Journal of The Korean Data Analysis Society
2003 .01
-
낙엽송 소경각재의 종접합 성능평가
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
설계기준해설 - 매입말뚝의 LRFD 설계 및 경제성
지반과 기술
2013 .01
-
System Reliability From Stress-Strength Relationship in Bivariate Pareto Distribution
한국데이터정보과학회지
2003 .03
-
Nondestructive Evaluation of Bending Strength Performances for Red Pine Containing Knots Using Flexural Vibration Techniques
목재공학(Journal of the Korean Wood Science and Technology)
2005 .01
-
Bending Strength of Korean Softwood Species for 120×180 mm Structural Members
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
Development of Knot Quantification Method to Predict Bending Strength Using X-ray Scanner
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
개정된 육안등급 구분에 따른 휨강도 특성 평가
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
Evaluation of Physical and Mechanical Properties of Non-certificated Laminated Veneer Lumber (LVL) Circulated in Domestic Lumber Market
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
Effect of Test Zone Selection for Evaluating Bending Strength of Lumber
목재공학(Journal of the Korean Wood Science and Technology)
2013 .01
-
핑거조인트가 국산 낙엽송 소경각재의 휨성능에 미치는 영향
목재공학(Journal of the Korean Wood Science and Technology)
2014 .01
-
Effect of HTT on Bending and Tensile Properties of 2D C/C Composites
Carbon science
2005 .01
-
Static Bending Performances of Cross-Laminated Wood Panels Made with Tropical and Temperate Woods
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
ESTIMATION OF SYSTEM RELIABLITY FOR REDUNDANT STRESS-STRENGTH MODEL
The Korean journal of computational & applied mathematics, 한국전산응용수학술지 Series A
1998 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0