지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 631 - 644 (14page)
이용수
초록· 키워드
오류제보하기
This article considers the problems of cylindrical bending of functionally graded plates in which material properties vary through the thickness. The variation of the material properties follows two power-law distributions in terms of the volume fractions of constituents. In addition, this paper considers orthotropic materials rather than isotropic materials. The traction-free condition on the top surface is replaced with the condition of uniform load applied on the top surface. Numerical results are presented to show the effect of the material distribution on the deflections and stresses. Results show that, all other parameters remaining the same, the studied quantities (stress, deflection) of P-FGM and E-FGM plates are always proportional to those of homogeneous isotropic plates. Therefore, one can predict the behaviour of P-FGM and E-FGM plates knowing that of similar homogeneous plates.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Bending analysis of FGM plates using a sinusoidal shear deformation theory
Wind & structures
2016 .01
-
Static analysis of the FGM plate with porosities
Steel and Composite Structures, An International Journal
2016 .01
-
Analysis of functionally graded plates using a sinusoidal shear deformation theory
Smart structures and systems
2017 .01
-
Nonlinear thermoelastic analysis of FGM thick plates
Coupled systems mechanics
2019 .01
-
Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory
Wind & structures
2016 .01
-
Bending analysis of functionally graded thick plates with in-plane stiffness variation
Structural engineering and mechanics : An international journal
2018 .01
-
Thermomechanical bending investigation of FGM sandwich plates using four shear deformation plate theory
Steel and Composite Structures, An International Journal
2019 .01
-
Analysis of functionally graded plates using a sinusoidal shear deformation theory
Smart Structures and Systems, An International Journal
2017 .01
-
An analytical approach for buckling of functionally graded plates
Advances in materials research : AMR
2016 .01
-
Three dimensional finite elements modeling of FGM plate bending using UMAT
Structural engineering and mechanics : An international journal
2018 .01
-
Effect of homogenization models on stress analysis of functionally graded plates
Structural engineering and mechanics : An international journal
2018 .01
-
Deflection of axially functionally graded rectangular plates by Green’s function method
Steel and Composite Structures, An International Journal
2019 .01
-
Effect of material transverse distribution profile on buckling of thick functionally graded material plates according to TSDT
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
A new quasi-3D theory for the study of the bending of thick FGM’s plates on elastic foundation
Smart Structures and Systems, An International Journal
2021 .01
-
Bending analysis of an imperfect FGM plates under hygro-thermo-mechanical loading with analytical validation
Advances in materials research : AMR
2016 .01
-
A new hybrid HSDT for bending, free vibration, and buckling analysis of FGM plates (2D & quasi-3D)
Smart Structures and Systems, An International Journal
2022 .03
-
Bending analysis of functionally graded plates using a new refined quasi-3D shear deformation theory and the concept of the neutral surface position
Steel and Composite Structures, An International Journal
2021 .01
-
On thermal stability of plates with functionally graded coefficient of thermal expansion
Structural engineering and mechanics : An international journal
2016 .01
-
Static deflections and stress distribution of functionally graded sandwich plates with porosity
Smart Structures and Systems, An International Journal
2021 .09
-
On thermal stability of plates with functionally graded coefficient of thermal expansion
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0