지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.1
- 수록면
- 223 - 238 (16page)
이용수
초록· 키워드
오류제보하기
In this study, bearing capacities and settlement profiles of six irregularly shaped footings located on sand have been experimentally and analytically investigated under the effect of axial loading. The main variable considered in the study was the geometry of the footings. The axial loads were applied from the center of gravities of the test specimens. Consequently, the effect of footing shape on the variation of the bearing capacities and settlement profiles have been investigated in this paper. The three dimensional finite element analyses of the test specimens were conducted using the PLAXIS 3D software. The finite element model results are in acceptable agreement with the results obtained using experimental investigation. In addition, the usability of the finite element technique by design engineers to determine the bearing capacities and settlement profiles of irregularly shaped footings was investigated. From the results of the study, it was observed that the geometric properties of the footings significantly influenced the variation of the bearing capacities and settlement profiles.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A new model for T-shaped combined footings part I: Optimal dimensioning
Geomechanics & engineering
2018 .01
-
A comparative study for design of boundary combined footings of trapezoidal and rectangular forms using new models
Coupled systems mechanics
2017 .01
-
Modeling for the strap combined footings Part I: Optimal dimensioning
Steel and Composite Structures, An International Journal
2019 .01
-
Pressure-settlement behavior of square and rectangular skirted footings resting on sand
Geomechanics & engineering
2017 .01
-
A new model for T-shaped combined footings part II: Mathematical model for design
Geomechanics & engineering
2018 .01
-
The bearing capacity of square footings on a sand layer overlying clay
Geomechanics & engineering
2015 .01
-
기초의 크기효과에 관한 수치해석
한국산학기술학회 논문지
2015 .01
-
Modeling for the strap combined footings Part II: Mathematical model for design
Steel and Composite Structures, An International Journal
2019 .01
-
Experimental investigation of the effects of pipe location on the bearing capacity
Geomechanics & engineering
2015 .01
-
Optimal area for rectangular isolated footings considering that contact surface works partially to compression
Structural Engineering and Mechanics, An Int＇l Journal
2022 .11
-
Critical setback distance for a footing resting on slopes under seismic loading
Geomechanics & engineering
2018 .01
-
Design of boundary combined footings of trapezoidal form using a new model
Structural engineering and mechanics : An international journal
2015 .01
-
Punching Behaviour of Reinforced Concrete Footings at Testing and According to Eurocode 2 and fib Model Code 2010
International Journal of Concrete Structures and Materials
2017 .12
-
Experimental and numerical analysis of the punching behavior of RC isolated footings
Steel and Composite Structures, An International Journal
2022 .12
-
Bearing capacity of strip footings on a stone masonry trench in clay
Geomechanics & engineering
2017 .01
-
Optimal design for the reinforced concrete circular isolated footings
Advances in computational design
2019 .01
-
Strengthening of isolated square footings using passive wrapping systems
Computers and Concrete, An International Journal
2021 .01
-
Analysis of shallow footings rested on tensionless foundations using a mixed finite element model
Structural Engineering and Mechanics, An Int＇l Journal
2022 .02
-
Optimal dimensioning for the corner combined footings
Advances in computational design
2017 .01
-
현장시험을 통한 D-Box 기초의 지지력 평가
한국지반신소재학회 학술발표회
2015 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0