지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 541 - 557 (17page)
이용수
초록· 키워드
오류제보하기
This research aims to analyze the fracture coalescence characteristics of brittle sandstone specimen ($80{\times}160{\times}30mm$ in size) containing various flaws (a single fissure, double squares and combined flaws). Using a rock mechanics servo-controlled testing system, the strength and deformation behaviours of sandstone specimen containing various flaws are experimentally investigated. The results show that the crack initiation stress, uniaxial compressive strength and peak axial strain of specimen containing a single fissure are all higher than those containing double squares, while which are higher than those containing combined flaws. For sandstone specimen containing combined flaws, the uniaxial compressive strength of sandstone increase as fissure angle (${\alpha}$) increases from $30^{\circ}$ to $90^{\circ}$, which indicates that the specimens with steeper fissure angles can support higher axial capacity for ${\alpha}$ greater than $30^{\circ}$. In the entire deformation process of flawed sandstone specimen, crack evolution process is discussed detailed using photographic monitoring technique. For the specimen containing a single fissure, tensile wing cracks are first initiated at the upper and under tips of fissure, and anti-tensile cracks and far-field cracks are also observed in the deformation process; moreover anti-tensile cracks usually accompanies with tensile wing cracks. For the specimen containing double squares, tensile cracks are usually initiated from the top and bottom edge of two squares along the direction of axial stress, and in the process of final unstable failure, more vertical splitting failures are observed in the ligament region. When a single fissure and double squares are formed together into combined flaws, the crack coalescence between the fissure tips and double squares plays a significant role for ultimate failure of the specimen containing combined flaws.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Crack initiation and fragmentation processes in pre-cracked rock-like materials
Geomechanics & engineering
2018 .01
-
Numerical simulation on the crack initiation and propagation of coal with combined defects
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
The effect of particle size on the edge notched disk (END) using particle flow code in three dimension
Smart Structures and Systems, An International Journal
2018 .01
-
Experimental and numerical study on the fracture coalescence behavior of rock-like materials containing two non-coplanar filled fissures under uniaxial compression
Geomechanics & engineering
2017 .01
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Direct shear testing of brittle material samples with non-persistent cracks
Geomechanics & engineering
2018 .01
-
Simulation of crack initiation and propagation in three point bending test using PFC2D
Structural engineering and mechanics : An international journal
2018 .01
-
The effect of ball size on the hollow center cracked disc (HCCD) in Brazilian test
Computers and Concrete, An International Journal
2018 .01
-
구조용강 인장시험편 내의 크랙 성장에 대한 해석 및 검증
한국기계기술학회지
2015 .01
-
Experimental and numerical simulating of the crack separation on the tensile strength of concrete
Structural engineering and mechanics : An international journal
2018 .01
-
ECA 기법을 이용한 해양구조물의 결함 평가
대한조선학회 논문집
2015 .12
-
Experimental and numerical simulating of the crack separation on the tensile strength of concrete
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
PFC3D simulation of the effect of particle size on the single edge-notched rectangle bar in bending test
Structural engineering and mechanics : An international journal
2018 .01
-
The investigation crack problem through numerical analysis
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
The investigation crack problem through numerical analysis
Structural engineering and mechanics : An international journal
2016 .01
-
Study on fracture characteristics of reinforced concrete wedge splitting tests
Computers and Concrete, An International Journal
2016 .01
-
The effect of micro pore on the characteristics of crack tip plastic zone in concrete
Computers and Concrete, An International Journal
2016 .01
-
Comparative study on cracked beam with different types of cracks carrying moving mass
Structural engineering and mechanics : An international journal
2015 .01
-
Experimental study on propagation behavior of three-dimensional cracks influenced by intermediate principal stress
Geomechanics & engineering
2018 .01
-
고장력 강판에서의 크랙 전파 및 성장특성에 대한 시뮬레이션 해석
한국자동차공학회논문집
2015 .09
이 논문의 저자 정보
최근 본 자료
댓글(0)
0