지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.1
- 수록면
- 249 - 262 (14page)
이용수
초록· 키워드
오류제보하기
In this study, high strength aluminum alloys (AA) plates are proposed as a new construction material for strengthening reinforced concrete (RC) beams. The purpose of this investigation is to evaluate AA plate's suitability as externally bonded reinforcing (EBR) materials for retrofitting shear deficient beams. A total of twenty RC beams designed to fail in shear were strengthened with different spacing and orientations. The specimens were loaded with four-points loading till failure. The considered outcome parameters included load carrying capacity, deflection, strain in plates, and failure modes. The results of all tested beams showed an increase up to 37% in the load carrying capacity and also an increase in deflection compared to the control un-strengthened beams. This demonstrated the potential of adopting AA plates as EBR material. Finally, the shear contribution from the AA plates was predicted using the models available in the ACI440-08, TR55 and FIB14 design code for fiber reinforced polymer (FRP) plates. The predicted results were compared to experimental testing data with the ratio of the experimentally measured ultimate load to predicted load, range on the average, between 93% and 97%.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Interfacial stresses in RC beam bonded with a functionally graded material plate
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Analytical analysis of the interfacial shear stress in RC beams strengthened with prestressed exponentially-varying properties plate
Advances in materials research : AMR
2018 .01
-
Interfacial stresses in RC beam bonded with a functionally graded material plate
Structural engineering and mechanics : An international journal
2016 .01
-
Experimental and Numerical Investigation of Shear Behavior of RC Beams Strengthened by Ultra-High Performance Concrete
International Journal of Concrete Structures and Materials
2019 .01
-
Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate
Advances in computational design
2017 .01
-
Design for shear strength of concrete beams longitudinally reinforced with GFRP bars
Structural engineering and mechanics : An international journal
2015 .01
-
A new model for adhesive shear stress in damaged RC cantilever beam strengthened by composite plate taking into account the effect of creep and shrinkage
Structural Engineering and Mechanics, An Int＇l Journal
2021 .09
-
Utilizing CFRP and steel plates for repair of damaged RC beams with circular web openings
Structural Engineering and Mechanics, An Int＇l Journal
2022 .10
-
Test Results and Nonlinear Analysis of RC T-beams Strengthened by Bonded Steel Plates
International Journal of Concrete Structures and Materials
2015 .06
-
Experimental analysis of shear deficient reinforced concrete beams strengthened by glass fiber strip composites and mechanical stitches
Steel and Composite Structures, An International Journal
2021 .01
-
New proposal for flexural strengthening of a continuous I-steel beam using FRP laminate under thermo-mechanical loading
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Analysis and modeling of hyperstatic RC beam bonded by composite plate symmetrically loaded and supported
Steel and Composite Structures, An International Journal
2022 .11
-
Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates
Structural engineering and mechanics : An international journal
2016 .01
-
Shear-strengthening of RC continuous T-beams with spliced CFRP U-strips around bars against flange top
Structural engineering and mechanics : An international journal
2017 .01
-
Experimental Verification of Resistance-Demand Approach for Shear of HSC Beams
International Journal of Concrete Structures and Materials
2016 .12
-
Elastic analysis of interfacial stresses in prestressed PFGM-RC hybrid beams
Advances in materials research : AMR
2018 .01
-
Influence of Shear Span-to-Effective Depth Ratio on Behavior of High‑Strength Reinforced Concrete Beams
International Journal of Concrete Structures and Materials
2021 .05
-
Experimental and Numerical Assessment of Reinforced Concrete Beams with Disturbed Depth
International Journal of Concrete Structures and Materials
2019 .11
-
Shear Strength of Prestressed Steel Fiber Concrete I-Beams
International Journal of Concrete Structures and Materials
2015 .09
-
고성능 섬유보강 RC 보의 전단강도 설계식 개발에 관한 연구
한국섬유공학회지
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0