지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 627 - 643 (17page)
이용수
초록· 키워드
오류제보하기
Negative stiffness, previously emulated by active or semi-active control for cable vibration mitigation, is realized passively using a self-contained highly compressed spring, the negative stiffness device (NSD).The NSD installed in parallel with a viscous damper (VD) in the vicinity of cable anchorage, enables increment of damper deformation during cable vibrations and hence increases the attainable cable damping. Considering the small cable displacement at the damper location, even with the weakening device, the force provided by the NSD-VD assembly is approximately linear. Complex frequency analysis has thus been conducted to evaluate the damping effect of the assembly on the cable; the displacement-dependent negative stiffness is further accounted by numerical analysis, validating the accuracy of the linear approximation for practical ranges of cable and NSD configurations. The NSD is confirmed to be a practical and cost-effective solution to improve the modal damping of a cable provided by an external damper, especially for super-long cables where the damper location is particularly limited. Moreover, mathematically, a linear negative stiffness and viscous damping assembly has proven capability to represent active or semi-active control for simplified cable vibration analysis as reported in the literature, while in these studies only the assembly located near cable anchorage has been addressed. It is of considerable interest to understand the general characteristics of a cable with the assembly relieving the location restriction, since it is quite practical to have an active controller installed at arbitrary location along the cable span such as by hanging an active tuned mass damper. In this paper the cable frequency variations and damping evolutions with respect to the arbitrary assembly location are then evaluated and compared to those of a taut cable with a viscous damper at arbitrary location, and novel frequency shifts are observed. The characterized complex frequencies presented in this paper can be used for preliminary damping effect evaluation of an adaptive passive or semi-active or active device for cable vibration control.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Damping and frequency of twin-cables with a cross-link and a viscous damper
Smart Structures and Systems, An International Journal
2019 .01
-
Full-scale experimental verification on the vibration control of stay cable using optimally tuned MR damper
Smart structures and systems
2015 .01
-
Cable vibration control with internal and external dampers: Theoretical analysis and field test validation
Smart Structures and Systems, An International Journal
2020 .01
-
Cable with discrete negative stiffness device and viscous damper: passive realization and general characteristics
Smart Structures and Systems, An International Journal
2015 .01
-
Damping of a taut cable with two attached high damping rubber dampers
Structural engineering and mechanics : An international journal
2015 .01
-
Full-scale test of dampers for stay cable vibration mitigation and improvement measures
Structural monitoring and maintenance
2018 .01
-
Nonlinear impact of negative stiffness dampers on stay cables
Structural monitoring and maintenance
2018 .01
-
Design formulas for vibration control of taut cables using passive MR dampers
Smart Structures and Systems, An International Journal
2019 .01
-
Multi-mode cable vibration control using MR damper based on nonlinear modeling
Smart Structures and Systems, An International Journal
2019 .01
-
Integrated cable vibration control system using Arduino
Smart Structures and Systems, An International Journal
2019 .01
-
Performance evaluation of inerter-based damping devices for structural vibration control of stay cables
Smart Structures and Systems, An International Journal
2019 .01
-
Experimental study of vibration characteristics of FRP cables based on Long-Gauge strain
Structural engineering and mechanics : An international journal
2017 .01
-
Development of a full-scale magnetorheological damper model for open-loop cable vibration control
Smart Structures and Systems, An International Journal
2019 .01
-
Design formulas for vibration control of sagged cables using passive MR dampers
Smart Structures and Systems, An International Journal
2019 .01
-
Condition assessment of stay cables through enhanced time series classification using a deep learning approach
Smart Structures and Systems, An International Journal
2022 .01
-
Structural behavior of cable-stayed bridges after cable failure
Structural engineering and mechanics : An international journal
2016 .01
-
Vibration control of a stay cable with a rotary electromagnetic inertial mass damper
Smart Structures and Systems, An International Journal
2019 .01
-
폴리머 케이블 크리프를 포함한 강성모델 기반의 단일 폴리머 케이블 위치 제어
한국정밀공학회 학술발표대회 논문집
2017 .05
-
Experimental evaluation of an inertial mass damper and its analytical model for cable vibration mitigation
Smart Structures and Systems, An International Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0