메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
류현기 (Gachon University) 손동훈 (LIG Nex1) 김준 (LIG Nex1) 이동근 (Agency for Defense Development) 박경수 (Gachon University)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제30권 제5호(통권 256호)
발행연도
2020.10
수록면
482 - 489 (8page)
DOI
10.5050/KSNVE.2020.30.5.482

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Structural stability analysis of a high maintenance lift mounting an unmanned aerial vehicle (UAV) like a scissor lift was carried out. The dynamic test of UAV requires the maintenance lift. However, while the dynamic test was being carried out, a gust load in the form of random wind force and normal wind force could affect the dynamics and stability of the maintenance lift. Moreover, the gust load can have a frequency effect (0 Hz ~5 Hz), and it can damage the safety of the maintenance lift and the UAV. Therefore, we constructed the symmetric four cables in order to prevent the destruction of the UAV test system by the rotating moments induced by the wind behavior. Based on the simulation results, we found that the yield strength of the steel cable with a diameter of 10 mm was sufficient to bear the rotating load considering the safety factor of 3, but the cable connection point between the cable and ground was adversely affected. Therefore, we additionally analyzed the rope tension and computed reaction forces at connection points to propose the optimal connection force with safety factor of 3.

목차

ABSTRACT
1. 서론
2. 전체 구조물 모델링
3. 하중 설계 및 해석
4. 결론
References

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-424-001285838