메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이태현 (한국생산기술연구원) 오제훈 (한양대학교) 감동혁 (한국생산기술연구원)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第38卷 第5號
발행연도
2020.10
수록면
435 - 440 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
In this study, the mechanical characteristics of CFRTP/SPFC980Y dissimilar joints were evaluated. Bolt/nut, SPR (Self Piercing Rivet), and hybrid (bolt/nut & adhesive) joining were selected to evaluate joint properties. In the bolt/nut joining case, the effect of washer application in the joint behavior was observed, and the tightening torque was optimized. In SPR joining, CFRTP and SPFC980Y lacked formability, so SPR joining was possible by applying the additional sheet. For hybrid (bolt/nut & adhesive) joining, cause the bolt"s preload, the tensile shear load was lower than the applied adhesive joint. Nevertheless, the highest toughness was obtained in the hybrid joint due to the stress distribution effect by adhesive.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과
4. 결론
References

참고문헌 (17)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-581-001591206