메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
LIU Huan (Shaanxi University of Science & Technology) DONG Jixian (Shaanxi University of Science & Technology) LUO Chong (Henan Cigarette Industry Sheet) DUAN Chuanwu (Shaanxi University of Science & Technology) GUO Xiya (Shaanxi University of Science & Technology) QI Kai (Shaanxi University of Science & Technology) QIAO Lijie (Shaanxi University of Science & Technology) ZHAO Zhiming (Shaanxi University of Science & Technology)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제52권 제5호(통권 제196호)
발행연도
2020.10
수록면
45 - 54 (10page)
DOI
10.7584/JKTAPPI.2020.10.52.5.45

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The specific edge load (SEL) is the commonly used intensity for measuring the low consistency refining process, while the cutting edge length (CEL) is the core parameter of it and the accuracy of its calculation is important for the process characterization. There are two main types of calculation methods of CEL for isometric straight bar plates, direct measurement methods and mathematical calculations based on the bar parameters. The CEL of isometric straight bar plates with different bar angles, field angles and bar width, calculated by different methods, were explored in order to verify the calculation accuracy of different methods. It was found that CEL₄ and CEL<SUB>5</SUB> could not be used for the CEL calculation of isometric straight bar plates due to the large errors, and CEL₁ was the most accurate direct measurement method. While the recommended mathematical calculation method was CEL₃ which could effectively and simply calculate the CEL of the straight bar plates with smaller errors.

목차

ABSTRACT
1. Introduction
2. Methodology
3. Results and discussion
4. Conclusions
Literature Cited

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-586-001591554