지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.14 No.6
- 발행연도
- 2020.11
- 수록면
- 859 - 876 (18page)
이용수
초록· 키워드
오류제보하기
Mechanical properties and durability of cement-based materials are largely affected by pore structures. This paper provides an overview of several experimental techniques to characterize pore size distribution and specific surface area, with focus on pores in calcium silicate hydrates. The reviewed experimental techniques are nitrogen and water vapor sorption isotherm, proton nuclear magnetic resonance (¹H-NMR) and small-angle scattering (SAS). Different pretreatment methods are compared for sorption measurements. Pore size distribution and specific surface area are analyzed using data from different methods to understand difference and consistency of these methods. It is found that pore size distribution calculated from sorption isotherm is very sensitive to adsorption model. Though specific surface areas from different techniques are quite different from each other, they are all able to detect the microstructural alteration due to long-term drying.
목차
Abstract
1. Introduction
2. Sorption Isotherm
3. Proton Nuclear Magnetic Resonance Relaxometry
4. Small-Angle Scattering
5. Discussion
6. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Investigating the effects of pore types on the pore geometry, topology and electrical resistivity in fractured and vuggy samples using pore-scale models
Geosystem Engineering
2019 .01
-
Simulation of Permeation of Saturated Cement Paste Based on a New Meso-scale Pore Network Model
International Journal of Concrete Structures and Materials
2021 .09
-
Determination of pore types in coquinas carbonates and their effects on formation factors and porosity exponents
Geosystem Engineering
2021 .01
-
Pool Boiling Heat Transfer of R-123 on Pored Surfaces
대한설비공학회 학술발표대회논문집
2019 .06
-
구형 PMMA와 WO<sub>3</sub> 분말이 혼합된 Camphene 슬러리의 동결건조에 의한 W 다공체 제조
한국재료학회지
2015 .01
-
Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis
International Journal of Concrete Structures and Materials
2020 .07
-
Influence of variance of pore size distribution on tensile mechanical properties of porous materials
한국생산제조학회 학술발표대회 논문집
2021 .07
-
Analysis of Intracellular Bone Ingrowth Characteristics on Trabecular-like Porous Structure according to Alteration of Pore size
대한기계학회 춘추학술대회
2021 .04
-
Analysis of Compression and Permeability Behavior of Porous Ti6Al4V by Computed Microtomography
Metals and Materials International
2019 .01
-
머신 러닝을 이용한 인공지지체 기공 크기 예측 모델에 관한 연구
반도체디스플레이기술학회지
2019 .01
-
CLS 방법을 이용한 Pore-scale 다상유동 해석에 대한 연구
한국전산유체공학회 학술대회논문집
2021 .05
-
고로슬래그 미분말 혼입 시멘트 페이스트의 프랙탈 특성에 관한 기초적 분석
콘크리트학회 논문집
2017 .02
-
스퍼터링을 통하여 다공성 양극산화 알루미늄 기판에 증착되는 니켈 박막의 기공 크기 조절
한국수소및신에너지학회논문집
2018 .10
-
Nano-engineering of Hybrid Titanium Oxide Structure (TiO2) using Pore-widening Concentration for Enhanced Superhydrophilicity
Corrosion Science and Technology
2024 .02
-
활성탄소의 기공 크기 분포가 자동차 증발가스 흡착특성에 미치는 영향
한국생산제조학회 학술발표대회 논문집
2022 .07
-
콘크리트 공극내 칼슘 용출량에 대한 해석
한국콘크리트학회 학술대회 논문집
2015 .10
-
막 증류 공정에 사용되는 기공 크기 조절이 가능한 초 소수성 섬유 분리 막의 개발
대한기계학회 춘추학술대회
2024 .11
-
Adsorption isotherm and kinetics analysis of hexavalent chromium and mercury on mustard oil cake
Environmental Engineering Research
2017 .03
-
Pore Structure of Calcium Sulfoaluminate Paste and Durability of Concrete in Freeze–Thaw Environment
International Journal of Concrete Structures and Materials
2017 .03
-
Effects of HA coatings on the surface characteristics of Ti-40Nb-xZr alloy with micro- and nano-sized pores
한국표면공학회 학술발표회 초록집
2021 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0