지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.12
- 수록면
- 1 - 11 (11page)
이용수
초록· 키워드
오류제보하기
The global transportation sector is one of the significant fuel consumers and contributes directly to greenhouse gas emissions due to fossil fuel consumption. Diesel blending used to reduce the reliant of fossil diesel in the transportation sector. Thus to reduce the environmental burden of fuel usage, new diesel blending formulations consist of biofuels were developed. The objective of the study is to assess the environmental performance of the five new diesel blending formulations with the existing diesel blending formulation by using Life Cycle Assessment method. In midpoint categories, the conventional B5 diesel blending has shown the lowest environmental impact compared to other fuels in most categories except for marine eutrophication, natural land transformation, ozone depletion, and terrestrial ecotoxicity. In the weighting stage, B5 diesel blending scored the lowest value and followed by blending 5, thus indicating its potential as an alternative to the existing diesel blending formulation. The presence of butanol in the new diesel blending majorly affects the environmental impact for many impact categories.
목차
ABSTRACT
1. Introduction
2. Life Cycle Assessment of Fuel Blending
3. Materials and Methods
4. Results and Discussions
5. Conclusions and Recommendations
References
참고문헌 (29)
참고문헌 신청
Ong HC, Mahlia TM, Masjuki HH. A review on energy pattern and policy for transportation sector in Malaysia. Renew Sustain Energy Rev. 2012:16(1):532-542.
Tzamkiozis T, Ntziachristos L, Samaras Z. Diesel passenger car PM emissions: From Euro 1 to Euro 4 with particle filter. Atmos Environ. 2010;44(7):909-916.
Malaysia to implement euro 4M in 2015.[Internet]. 2012. [cited 1 August 2020]. Available from: www.acfa.org.sg/pdf/ InFocus8%202012_06%20Malaysia.pdf.
BP Statistical Review of World Energy 2019, 68th edition.[Internet]. 2019. [Cited 1 January 2020]. Available from: https://www.bp.com/content/dam/bp/business-sites/en/global/corporate/pdfs/energy-economics/statistical-review/bp-statsreview- 2019-full-report.pdf.
Yusuf NN, Kamarudin SK, Yaakub Z. Overview on the current trends in biodiesel production. Energy Conv. Manage. 2011; 52(7):2741-2751.
Tzamkiozis T, Ntziachristos L, Samaras Z. Diesel passenger car PM emissions: From Euro 1 to Euro 4 with particle filter. Atmos Environ. 2010;44(7):909-916.
Malaysia to implement euro 4M in 2015.[Internet]. 2012. [cited 1 August 2020]. Available from: www.acfa.org.sg/pdf/ InFocus8%202012_06%20Malaysia.pdf.
BP Statistical Review of World Energy 2019, 68th edition.[Internet]. 2019. [Cited 1 January 2020]. Available from: https://www.bp.com/content/dam/bp/business-sites/en/global/corporate/pdfs/energy-economics/statistical-review/bp-statsreview- 2019-full-report.pdf.
Yusuf NN, Kamarudin SK, Yaakub Z. Overview on the current trends in biodiesel production. Energy Conv. Manage. 2011; 52(7):2741-2751.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Performance and emission characteristics of biodiesel-blend in diesel engine: A review
Environmental Engineering Research
2022 .02
-
상용화제가 생분해성 고분자 Blend Film 의 연신공정에 미치는 영향 연구
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
Non-isothermal pyrolysis of cashew shell cake-bituminous coal blends
Environmental Engineering Research
2018 .06
-
Fabrication and Characterization of Antibacterial Poly(vinylidene fluoride)-Based Blend Using Melt-blending
한국고분자학회 학술대회 연구논문 초록집
2023 .04
-
Toward Thermally Stable Ternary Blend All-Polymer Solar Cells : The Importance of Morphological Stability in All-Polymer Blends
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
실리카로 보강된 SSBR/ENR 블렌드의 물성 연구
폴리머
2018 .01
-
Preparation and Characterizations of Polymethylmethacrylate (PMMA)/Acrylate Rubber (ACM) Blend for Light Diffuser Applications
Elastomers and composites
2015 .01
-
CCS 공정에 있어서 CO₂ 흡수제 최적 혼합 비율에 대한 연구
대한산업공학회 추계학술대회 논문집
2023 .11
-
A Review on Spray Characteristics of Biobutanol and Its Blended Fuels in IC engines
한국액체미립화학회지
2016 .01
-
Blend ratio에 따른 동적점탄성 비교 연구
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Structural Characterization and Physical Properties of Poly(ethylene terephthalate) and Poly(trimethylene terephthalate) Blends: Effects of Blending Time and Blend Ratio
한국섬유공학회지
2017 .01
-
Effects of Crosslink Agents on Sodium Alginate and Lignosulphonic Acid Blends
폴리머
2016 .01
-
Thermal Stability and Structure of Polymer-Grafted Nanoparticles Blends
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Phase Behavior of Block Copolymer Blends Having DNA-like interactions
한국고분자학회 학술대회 연구논문 초록집
2015 .10
-
Combination of a GP-GAN and a Content Loss for Realistic Image Blending
대한전자공학회 학술대회
2022 .06
-
Mechanical Properties and Thermal Stability of Waste PVC/HDPE Blend Prepared by Twin-screw Extruder
Elastomers and composites
2019 .01
-
Ternary blends for large area flexible organic solar cells
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
에너지함유 열가소성탄성체 적용을 위한 아지드화 폴리부타디엔/에틸렌-비닐아세테이트 공중합체 블렌드 제조
화학공학
2015 .01
-
Novel coating method generating hydrogel-PDMS blend surfaces
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
A novel coating method generating hydrogel-PDMS blend surfaces
한국고분자학회 학술대회 연구논문 초록집
2017 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2021-539-001423085